Park assist

[George Owens]

is there a way to possible re calibrate or set the park assist it seems to only beep once than after that it won't let me know if I'm close to something

 

[PG01]

May have to dealer flash it. Did you turn it off and leave it off for a few minutes and drive around. Shut truck off then start it up and try it out.

 

[M3kanic]

Mine was acting funny after I pulled my camper for a few days. I ended up turning the key to the on position, putting it in reverse and tapping (messing) with each sensor and it started to work again. I had read somewhere that if you do that you can hear / feel them vibrate. I did not hear or feel anything.

Sent from my SM-G955U using Tapatalk

 

[PG01]

Mine goes off when i pull any trailers or say park assit blocked and then goes off... never felt it to see if it vibrates..ill have to check it out..