Peddle adjustment not working!

[swathdiver]

So shop Manuel I found and it looks like ont that is on line. Any suggestions. Also take a look at the attached pic. All look good.? Thank you

Ken

You can buy a pdf copy for download or a disc from people on Ebay. What is much better is a subscription to it on AllDataDIY or Mitchell. I've been using AllDataDIY for about ten years.

That photo doesn't show much, make sure it comes with the 33.004 software, the CanDi module and all the little cables, adapters, etc. Many are used to for self-testing and it also provides several ways to power it up. The one you'll use most often is just to plug the OBDII adapter into the port and power it from there with the truck running.

If you power it with the truck off, it may drain the battery pretty quickly. If you need to run it with the truck off, use an alternate power setup provided. It should come with a disc with pdf instructions or you can download them off the internet.

 

[Fubar0715]

@The Grey Beast Where are you located? Many members are happy to assist with Tech2 devices for troubleshooting issues. Maybe there is a member close to you.

 

[The Grey Beast]

@The Grey Beast Where are you located? Many members are happy to assist with Tech2 devices for troubleshooting issues. Maybe there is a member close to you.

There are and they already offered to help.

I’ll have to take them up
On it.

Ken

 

[The Grey Beast]

You can buy a pdf copy for download or a disc from people on Ebay. What is much better is a subscription to it on AllDataDIY or Mitchell. I've been using AllDataDIY for about ten years.

That photo doesn't show much, make sure it comes with the 33.004 software, the CanDi module and all the little cables, adapters, etc. Many are used to for self-testing and it also provides several ways to power it up. The one you'll use most often is just to plug the OBDII adapter into the port and power it from there with the truck running.

If you power it with the truck off, it may drain the battery pretty quickly. If you need to run it with the truck off, use an alternate power setup provided. It should come with a disc with pdf instructions or you can download them off the internet.

I’m bookmarked the

 

[The Grey Beast]

As I was saying I bookmarked all data and Mitchell. I’ll look them up when I have my Tech2 in hand.

It has the 3300.04 software. It comes with attachments. I’m be done enough research I’m confident it’s the right one. Which is usually not the case. I’ll believe it when I see it.

Regards.

Ken

 

[mikez71]

i *seem* to remember when i used only the obd port with engine off, there was an issue where the candi module wouldnt connect, so i always use the cigarette power just in case.

 

[The Grey Beast]

i *seem* to remember when i used only the obd port with engine off, there was an issue where the candi module wouldnt connect, so i always use the cigarette power just in case.

That’s good to know. I hope mine work.

Lol

Thank you.

Ken

 

[The Grey Beast]

Ok thank you just put Diodes on the puddle lights. Tesla be praised.

Ken

 

[The Grey Beast]

You will need a Multi meter or a test light to check to see if power is present. Watch you tube to learn how to use a meter.

Just ordered one with all the attachments.

Thank
You.

Ken

 

[The Grey Beast]

so I took it to the dealer and of course it was unplugged and so the dealer plugged it in and guess what it works. I feel dumb but I’m unfamiliar with this Tahoe. Thank you all for the help. My pride is hurt but not my pocket book.

Thank you.

Ken