twas another long day/night. i ended up drinkin a bunch of beer so i must've accomplished something.
let's see here..
removed the front lip
time for body filler/bondo!
as you can see all this acne on the paint on both sides of the front bumper cover.
and this pretty nasty scratch/groove on the right rear
quick skim coat of body filler (actually i think i did 2 coats on the front)
after about an hour and a half of sanding with various different grits. primed
waited about an hour and then sanded all the primer until it felt seamless and smooth as new. hard to tell by looking, but it came out great.
went over the whole body again looking for any gloss with a 3M pad and scuffing one more time.
so what do i left to do? actually, the pain in the as$ stuff is pretty much complete. I need to install this dessicant filter somehow to my compressor so i am spraying clean air
few other items and small things but i am almost ready to spray. unfortunately its coldest time of the year, but during the day it is still hot enough to spray and flash the paint. i just need to keep an eye on the weather and pick a 3-4 day block of good weather and DO IT.
nice knowing the bodywork is pretty much complete though. end of boring post. cheers