Phantom Billet Grill install

[acewingman]

I tried messaging somebody on these forums but there is a mandatory spam amount of 10 posts before I can message somebody here. You know a simple captcha would prevent abuse of the messaging system.

I just started installing a phantom grill on my 2000 Tahoe Limited and don't see any way to install the phantom grill inserts on the bottom and then be able to secure the grill back to the vehicle.

Has anybody done this and have any possible recommendations on how to fasten the grill to the vehicle behind the inserts and turn signal lights?

 

[xanatost]

you have any pics or a link to the grill you got? on my inserts I cut my old grill out and connected with clips

 

[acewingman]

Yeah, I got some screen captures of the bolts I am talking about...

The grill I got has plates that screw in with U clips. The directions state to remove the grill shell and loosen the corner signal lens to slide the phantom grill ends under then and tighten them back up.

The problem is the four bolts in the pictures below.