Plasti Dip

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
BLKTah02

BLKTah02

Full Access Member
Joined
Nov 25, 2012
Posts
122
Reaction score
1
I have my bumpers, badges, rims, roof rack, side moldings, grill, and had a couple pieces in interior plasti dipped. I will do my entire burb one day. Plan on doing my gfs caprice before mine.

nice how did u remove the front grille ??
 

Big Buttons

The SS Burb
Supporting Member
Joined
Nov 10, 2010
Posts
3,479
Reaction score
36
Location
South Texas
1) Open hood
2) pop up the holders that hold down the grill cover thing
3) One 10mm bolt to the right of the hood latch
4) Four screw looking things on each corner turn counter-clockwise 1/4 turn with a Phillips screwdriver
5) each end pops off

Sounds harder than it is. You may need to remove headlights to get enough to pull out the sides, but that takes 2 seconds...
 

alc5m

Full Access Member
Joined
Dec 30, 2010
Posts
324
Reaction score
1
pretty much the hardest part of all of that is going to be popping the 2 ends off steve, look real hard and you could prob get a screw driver in to pop the clips out on the ends
 

Big Buttons

The SS Burb
Supporting Member
Joined
Nov 10, 2010
Posts
3,479
Reaction score
36
Location
South Texas
I just take out the headlights, well not really take them out just move them over to get my hands on the top part, grab and yank out. May take a little bit of force but don't worry you won't break it.
 
OP
OP
BLKTah02

BLKTah02

Full Access Member
Joined
Nov 25, 2012
Posts
122
Reaction score
1
1) Open hood
2) pop up the holders that hold down the grill cover thing
3) One 10mm bolt to the right of the hood latch
4) Four screw looking things on each corner turn counter-clockwise 1/4 turn with a Phillips screwdriver
5) each end pops off

Sounds harder than it is. You may need to remove headlights to get enough to pull out the sides, but that takes 2 seconds...

pretty much the hardest part of all of that is going to be popping the 2 ends off steve, look real hard and you could prob get a screw driver in to pop the clips out on the ends

I just take out the headlights, well not really take them out just move them over to get my hands on the top part, grab and yank out. May take a little bit of force but don't worry you won't break it.

thanks guys i will give it a try this weekend
 

RedCrush

Full Access Member
Joined
Jul 26, 2012
Posts
104
Reaction score
1
I plan to do all of mine, the roof especially since the sun ate the red paint. I basicly want to paint everything that is red on mine matte black..
 
OP
OP
BLKTah02

BLKTah02

Full Access Member
Joined
Nov 25, 2012
Posts
122
Reaction score
1
I plan to do all of mine, the roof especially since the sun ate the red paint. I basicly want to paint everything that is red on mine matte black..

nice i just started to paint the bottom of the bumper today and it looks good
 

Forum statistics

Threads
133,340
Posts
1,883,901
Members
98,429
Latest member
randallwhitt
Top