Possible Vacuum Leak, With Graphs

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
2

2001LSHoe

TYF Newbie
Joined
Sep 16, 2021
Posts
15
Reaction score
1
Alright I’m back. It’s finally gotten cold enough to really replicate the symptoms I had been having earlier.

There’s a bad misfire on cylinder 3 and sometimes 1. IMG_7456.png
 
OP
OP
2

2001LSHoe

TYF Newbie
Joined
Sep 16, 2021
Posts
15
Reaction score
1
IMG_7457.png

Wanted to post the misfire history. I’ve already changed spark plugs on cylinders 1 , 3 and 8 twice in the last 30,000 miles. I also changed spark plug wires at the same time as well. That was the summer of 2023. I started having issues that winter when it got cold.
 

houstontaylor

Member
Joined
Dec 4, 2017
Posts
86
Reaction score
93
Is the intake air temperature from the mass air flow sensor at startup about the same as the outside air temperature? If the sensor is off it could make the computer think it's getting more or less air than it really is.
 
OP
OP
2

2001LSHoe

TYF Newbie
Joined
Sep 16, 2021
Posts
15
Reaction score
1
Is the intake air temperature from the mass air flow sensor at startup about the same as the outside air temperature? If the sensor is off it could make the computer think it's getting more or less air than it really is.

I checked this morning. Was 42F on the air intake temp sensor and it was 42F outside.

Probably going to have to take her to a mechanic before something catastrophic happens.
 
OP
OP
2

2001LSHoe

TYF Newbie
Joined
Sep 16, 2021
Posts
15
Reaction score
1
I checked this morning. Was 42F on the air intake temp sensor and it was 42F outside.

Probably going to have to take her to a mechanic before something catastrophic happens.


So after the engine warmed up and the outside air remained stagnant, the intake air sensor read 57F. Obviously part of that is the engine heat.
 
OP
OP
2

2001LSHoe

TYF Newbie
Joined
Sep 16, 2021
Posts
15
Reaction score
1
Decided to buy a fuel pressure gauge and at the rail after priming it, it reads 53-54 psi. However, leaving it on after turning the car off the pressure quickly drops. So it’s leaking somewhere.

I’m going to first try the fuel pressure regulator. After that it’s either the pump or injector.
 
OP
OP
2

2001LSHoe

TYF Newbie
Joined
Sep 16, 2021
Posts
15
Reaction score
1
IMG_2535.jpeg

No dice but it does hold fuel pressure. Still below spec, however. Hoping someone reads this and can point me in a direction. Going to be taking her to a mechanic this week.
 

Attachments

  • IMG_0128.jpeg
    IMG_0128.jpeg
    99.1 KB · Views: 2

ivin74

05 NBS Nali
Joined
Aug 3, 2014
Posts
2,384
Reaction score
2,493
Location
Htown, Texas
I did new plugs and wires, fuel filter and cleaned MAF all within the last year. I initially had this issue last winter on a morning when it got down to -15F. In the winter time the symptoms are much worse. The car had 90,000 miles and was a one owner when I purchased it in 2022. It now has 150,000 on the clock. It was garage kept its entire life and was very well maintained.
Have you ever cleaned the fuel injectors?
I agree with @B-train, they need to be cleaned.

Another thing you can do is remove the spark plugs and inspect the cylinder w a endoscopy camera for wet spots.



 
OP
OP
2

2001LSHoe

TYF Newbie
Joined
Sep 16, 2021
Posts
15
Reaction score
1
Have you ever cleaned the fuel injectors?
I agree with @B-train, they need to be cleaned.

Another thing you can do is remove the spark plugs and inspect the cylinder w a endoscopy camera for wet spots.




When you say clean do you mean running a fuel injector cleaner through the gas tank? Or physically taking the fuel injectors out to observe them? It's been a while since I've ran injector cleaner through them IIRC. So I'll give that a shot.

Okay another question is the temperature on exhaust port on cylinder three was double the temp of the others when I ran it for about a minute this morning. Increasing RPM smoothed the feel of the engine out but the misfiring is still there. Would this mean an issue with the spark? IE it's not getting enough spark to burn the fuel correctly? The only confusing thing to me is that it's also happening on cylinders 1, 2 and 8. So cylinders 1, 2, 3 and 8 are the primary culprits. Especially number 3. I changed the wire from cylinder 4 and 3 and that didn't make a difference.

Also, the air to fuel ratio on start up is below 14.7 so that means it's not getting enough air, correct? So, why does the PCM want to keep dumping fuel into the combustion chamber?
 

Forum statistics

Threads
132,714
Posts
1,873,086
Members
97,538
Latest member
Elio_vega
Top