Power Window Non-Op: Talk to me Goose!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

IRQVET

2 Door Owners Club
Joined
Oct 21, 2009
Posts
503
Reaction score
65
Location
Tallahassee, FL.
What am I over looking, probably something stupid. Driver power window is non-op, passenger side goes up and down just fine.

Fuse is fine.
Replaced the door switches (thought that would take care of it, but I was wrong)

Its a 2 door Hoe, and like I said the passenger side goes up and down just fine. But when I hit the driver side button, nada. No movement, no noises.
 

Attachments

  • IMG_1325.JPG
    IMG_1325.JPG
    116.2 KB · Views: 3
  • IMG_1327.JPG
    IMG_1327.JPG
    78.5 KB · Views: 3

swathdiver

Full Access Member
Joined
May 18, 2017
Posts
19,592
Reaction score
26,291
Location
Treasure Coast, Florida
What am I over looking, probably something stupid. Driver power window is non-op, passenger side goes up and down just fine.

Fuse is fine.
Replaced the door switches (thought that would take care of it, but I was wrong)

Its a 2 door Hoe, and like I said the passenger side goes up and down just fine. But when I hit the driver side button, nada. No movement, no noises.
I don't think those had computer modules operating them, did you test the motor itself yet? That's what I would do next.
 

east302

Full Access Member
Joined
Dec 21, 2016
Posts
1,627
Reaction score
1,506
Location
Mississippi
Agreed with the above. Pull the connector at the motor, see if you get voltage there when the switch is activated.
 

OR VietVet

Multnomah Falls
Supporting Member
Military
Joined
Oct 8, 2014
Posts
20,740
Reaction score
36,629
Location
Willamette Valley
You can also inspect for any wire problems at the door jam convoluted tubing where the hinges are. Possible rubbed thru wire insulation problems.
 
OP
OP
IRQVET

IRQVET

2 Door Owners Club
Joined
Oct 21, 2009
Posts
503
Reaction score
65
Location
Tallahassee, FL.
I ordered a new relay that is suppose to arrive today. After I install that and see if the motor has juice and I’ll report back.

Do I need to disassemble anything to get to the motor?
 

Eman85

Full Access Member
Joined
Apr 18, 2021
Posts
459
Reaction score
677
Switch works by reversing polarity to the motor so it runs the different directions. Do you have voltage and ground at the switch?
 
OP
OP
IRQVET

IRQVET

2 Door Owners Club
Joined
Oct 21, 2009
Posts
503
Reaction score
65
Location
Tallahassee, FL.
Forgot to round back. Window is operational again but I have no idea why. Replaced the switch, didn’t fix it. So I pulled the door panel and began looking at the wiring and didn’t see anything wrong. My hand must have brushed against the motor wire, because it just started working all of a sudden. Lose wire?
 

Eman85

Full Access Member
Joined
Apr 18, 2021
Posts
459
Reaction score
677
PW motors get wear on the armatures sometimes banging on the door or just slamming it jars the armature to a spot where it works, until it doesn't.
 

Forum statistics

Threads
132,332
Posts
1,866,195
Members
96,954
Latest member
Wallygtr
Top