Rear bowtie

[Philip579]

Does anyone know how to remove the rear bowtie. I want to replace both the front and back with black ones. I can get the front off, just dont know how to remove the rear

 

[gilbo]

simple 15lb fishing line and hair dryer is all

just double sided tape, but bcareful not to break the two PLASTIC alignment pins

should take u no more than 5 minutes

 

[Philip579]

bowtie removal

Thanks

 

[Donovan]

There are 2 flat retainer washers the hold it on besides the tape. I can reach the back of the emblem as soon as I pop the hood. My front bowtie got ripped off in a car wash. So I learned the hard way.

---------- Post added at 08:12 PM ---------- Previous post was at 08:10 PM ----------

There are 2 flat retainer washers the hold it on besides the tape. I can reach the back of the emblem as soon as I pop the hood. My front bowtie got ripped off in a car wash. So I learned the hard way.

I don't know about the rear. It may only have double side tape. This seems to be GM's favorite method

 

[KMeloney]

I don't know about the rear. It may only have double side tape. This seems to be GM's favorite method

The correct answer was posted @ 4 hours before your post. No need to still not be sure about the rear.

 

[THE YETI]

I Just used a flat blade screwdriver and a cloth to prevent scratching the finish. Gently pry here and there until you can get your fingers under.

It's just double sided tape. Pops right up.

 

[Donovan]

The correct answer was posted @ 4 hours before your post. No need to still not be sure about the rear.

Thanks for taking the time to point that out. I feel extra special now.

 

[JochenWoern]

Thanks for taking the time to point that out. I feel extra special now.

As you should.