mikez71
Full Access Member
- Joined
- Mar 9, 2023
- Posts
- 1,111
- Reaction score
- 1,293
Bought some Motofab 1" rear lift spacers from Amazon.
My concerns is when I stack them on each other, they do not fit snugly. There is about 1/8" of play. Enough I can slide them with my hands and make a loud clacking noise.
Not sure if they are purposely made this way, but either the cup portion is oversize (my guess because there is a ridge inside the bottom (top?) of the cup portion.)
Or the bump is undersized. (Or both)
![IMG_0137.jpeg IMG_0137.jpeg](https://www.tahoeyukonforum.com/data/attachments/429/429273-4e893e8b67285b64200e57b7663058d9.jpg)
Worried the spring or cup could shift around and make noise.. Is this amount of play normal in spacers?
I assume the protrusion and the recess should be nearly the same diameter..
My concerns is when I stack them on each other, they do not fit snugly. There is about 1/8" of play. Enough I can slide them with my hands and make a loud clacking noise.
Not sure if they are purposely made this way, but either the cup portion is oversize (my guess because there is a ridge inside the bottom (top?) of the cup portion.)
Or the bump is undersized. (Or both)
![IMG_0137.jpeg IMG_0137.jpeg](https://www.tahoeyukonforum.com/data/attachments/429/429273-4e893e8b67285b64200e57b7663058d9.jpg)
Worried the spring or cup could shift around and make noise.. Is this amount of play normal in spacers?
I assume the protrusion and the recess should be nearly the same diameter..
Last edited: