Rear seat removed. Loss keyless entry.

[dbbd1]

I soo want to take out that third row the tilted cargo area is driving me NUTS!!!! How bad was the mod?

And the mini storage area.

Alas, the wifey says no. "You never know when we might need the room" (yes, I DO know...)

 

[Ct Pirate]

I'll over look the option for the two-three times a year I might need it. Hell I'll call them an Uber and the rest of the year be happy every time I open the hatch. And DAM that hatch is low !!!

 

[wolf1340]

And the mini storage area.

Alas, the wifey says no. "You never know when we might need the room" (yes, I DO know...)

15 minutes. Remove 7 15mm bolts. Unplug harness. Remove seat. Put bolts back in holes. Then either get a cargo mat or a piece of carpet. Will be missing carpet in a few areas.

 

[Ct Pirate]

OH HELL YEAH!!! I'm doing it! I use a weathertech mat anyways.

 

[noob]

I wonder how large the trunk will look without the seats in my esv? It’s already pretty large and I only have 1 kid

 

[Ct Pirate]

Not sure but I'll know shortly!!! Does anyone else have a before and after pic?

 

[wolf1340]

Problem solved. Put seat back in to see if that was the issue. While pugging it in I could hear something hitting floor. Looked under carpet and found a wire unplugged. Looks like it goes to an antenna for the keyless stuff. Looks like a little square box. Plugged it back in and all is good. Took seat back out. I must have unplugged it while pulling on the seat plug in. It’s tied in to the same harness.

 

[Ct Pirate]

AWESOME WOLF!!!! Looks like I know what I'm doing for the next mod!!! Thanks for the pics man NICE!!!!

 

[yesac]

OK so got all the bolts unbolted on the third row - but I can't figure out how to unhook the electrical harness. Is there some trick to it? I feel like I'm going to break it.

 

[wolf1340]

OK so got all the bolts unbolted on the third row - but I can't figure out how to unhook the electrical harness. Is there some trick to it? I feel like I'm going to break it.

First to make it easier. I put a 2x6 to hold the seat up. Then get a small screwdriver to undo the clip holding the connections together. It’s just a little clip you got to lift so the connections will come apart.