Regearing my xfe tahoe

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Nortex

Full Access Member
Joined
Mar 21, 2011
Posts
974
Reaction score
36
We bought my wife a 09 tahoe with 3.08s.I really really dis-like the gears. I have 285/45/22 on it and want to know if I should go 3.73 or 4.11? It is a 6 speed 5.3 and we do a 50/50 mix of driving.
7b392f5c88255ef91738c551db84f714.jpg


Sent from my SCH-S968C using Tapatalk
 

Sdog4127

TYF Newbie
Joined
Jan 14, 2016
Posts
29
Reaction score
15
3.08's, that's rough. It must practically idle at 70mph! 3.42's should give you about 2,000 rpm @80 mph, especially with the slightly larger wheel diameter you have over stock. I think 3.73 would be a good trade off, although I'm sure 4.10 for city driving would really pep it up. You would probably be running 2700 RPM or so @ 80 mph highway driving. I guess it depends on your preference... Good seat of the pants feeling when driving around town, or slightly better mileage when cruisin'

Good luck.


Sent from my iPhone 6s Plus using Tapatalk
 

DRC

TYF Newbie
Joined
Mar 1, 2012
Posts
27
Reaction score
1
Location
Rocky Top, USA
If your towing, having lowers gear would be beneficial, if your driving mostly solo, I wouldn't bother.
Dropping to lower gears will affect your mileage, 342's, 373's would be ok, I would NOT go 411's.
 
OP
OP
N

Nortex

Full Access Member
Joined
Mar 21, 2011
Posts
974
Reaction score
36
We decided on 3.73.

Sent from my SCH-S968C using Tapatalk
 

M3kanic

Full Access Member
Joined
Jan 28, 2015
Posts
488
Reaction score
288
With the 6 speed transmission 3.42 are the same as 4.10. So going with that high of a gear is not beneficial unless you are going to be doing a lot of off roading.

The information about the gearing is around here somewhere.

Sent from my SM-G900V using Tapatalk
 
OP
OP
N

Nortex

Full Access Member
Joined
Mar 21, 2011
Posts
974
Reaction score
36
Really! I was going off my 05 sierra which I know is a 4 speed. We do very little towing. I need to read this gearing info

Sent from my SCH-S968C using Tapatalk
 

EnigmaMan

Member
Joined
Jul 2, 2016
Posts
61
Reaction score
11
One thing you should do is take a look at a transmission + rear gear calculator as one found here:

http://chevellestuff.net/tools/rpm_calculator.htm


GM 6-Speed 6L80 MYC Hydra-Matic Automatic Transmission (Standard Typical tranny on a 2014)

First: 4.03
Second: 2.36
Third: 1.53
Fourth: 1.15
Fifth: 0.85
Sixth: 0.67
Reverse: 3.06

You can see the final input / speed here in the attached photo.
3.08 vs 3.73 gears + 33" tire

Note: This does not take into account tranny slippage etc so your real world values may be off +/- ~100-200rpm
Note: I changed the gear ratios and is NOT using a TH700-R4 transmission and is using the 6 speed transmission gears that come with our rigs.

rear-gears.png

Hope this helps in gearing!



3.08 vs 4.11 gears + 33" tire
rear-gears1.png
 
OP
OP
N

Nortex

Full Access Member
Joined
Mar 21, 2011
Posts
974
Reaction score
36
We did 4.10 and love them.

Sent from my SM-S975L using Tapatalk
 

Forum statistics

Threads
132,426
Posts
1,867,972
Members
97,107
Latest member
Wannabez71

Latest posts

Top