Relearn

[tna0066]

What was that process again with turning key to on..pressing gas..etc. I remember reading it somewhere and that it gives you a little extra bump in power.

 

[F'in-hoe]

When you turn key to on position and press and release gas petal 3 times then start truck it turns off the change oil light. That's the only one I know of.

 

[livingez_123]

Here's how you do it:
- Get in the truck shut the doors buckle the seat belt.
- put the keyin the ignition and turn it to the on position ( do not turn it over)
- press the pedal down as quick as possible and hold it to the floor
- turn the key to the off position
- wait a few seconds the. Release the pedal.

 

[F'in-hoe]

Here's how you do it:
- Get in the truck shut the doors buckle the seat belt.
- put the keyin the ignition and turn it to the on position ( do not turn it over)
- press the pedal down as quick as possible and hold it to the floor
- turn the key to the off position
- wait a few seconds the. Release the pedal.

Is this for real? What does it actually do?

 

[Grimes]

Combo moves give you moar power?

 

[tna0066]

There's a lag when you press the gas, once you do this you get immediate throttle response...vroom vroom...lol

 

[diemer]

Make sure all rear seat belts are buckled when performing this combo move!

 

[08grey]

Plug the flux capacitor in the cigarette lighter closest to the battery.

 

[F'in-hoe]

Wow big difference especially with the terminator 2 tranny!! Lol

 

[oh1yukonslt]

Plug the flux capacitor in the cigarette lighter closest to the battery.

And don't forget to fill your alternator up while your under there. And top off your blinker fluid. Here is a how to video about it:

http://youtu.be/ZxkHqPXwNZ4