Remote Starter Luck/Unlock

[Ghosterix]

I'm pretty much done with my install of a Viper 5906V + iDataLink ADS-DL-GM1 in a 2004 Tahoe.
However I have one thing I'm not sure about.. the door status wire input on the Viper. It seems like the iDataLink does not have a door status output.
Should i get the status from the Tahoe's wiring directly? Seems a little bit weird that I should need to go to each door to get status...

Remote start is up and running, but Viper will not see if i open any doors

 

[Blackie]

I'm pretty much done with my install of a Viper 5906V + iDataLink ADS-DL-GM1 in a 2004 Tahoe.
However I have one thing I'm not sure about.. the door status wire input on the Viper. It seems like the iDataLink does not have a door status output.
Should i get the status from the Tahoe's wiring directly? Seems a little bit weird that I should need to go to each door to get status...

Remote start is up and running, but Viper will not see if i open any doors

According to the install guide:
http://images.idatalink.com/corporate/Content/Manuals/DL-GM1/ADS-DL-GM1_20111004.pdf

The door status output on your ADS-DL-GM1 is a green wire on the 10 pin harness. It is next to your tach output wire.

 

[Ghosterix]

seems like you are right. Don't know why i missed it.. strange .. thank you!