I am installing a Blue Ox base plate on my 2023 Yukon and need to remove the front facia in order to mount the plate. Blue Ox does not provide much help with removal instructions. Any help here would be most appreciated. I have been removing some of the obvious bolts etc. all day and it just seems like I am missing something in the center section of the assembly.
Removal of front facia
- Thread starter Croeser
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I had mine off to this capacity, where the bumper and fender meet there are two screws on each side that have to come out. There is a bunch on top to take out the tray once you pop the hood. After that everything is just clips for the most part. There wasn’t any screws in the center of mine, I had to pull it forward some to get it off the radiator support.
