rick1024
Member
Has anyone removed the trim panels from the rear of the vehicle? i have a rattling that is driving me out of my gourd and im more than happy to take the rear apart to find it, but i dont want to break anything. any tips or ideas?
Remove rear interior panels
- Thread starter rick1024
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
first you have to remove the trim around the rear hatch top & bottom, then the rear pillars, then rear side panels come off
there are youtube video's, it's essentially been the same process since 00.
beware of a couple hidden screws on the rear pillars, they usually have a small cover that comes off first then you can access the screw
Last edited:
Joseph Garcia
Supporting Member
- Joined
- Aug 2, 2018
- Posts
- 7,574
- Reaction score
- 10,411
Before removing the covers, did you check your truck jack compartment? Make sure that the jack and handle are firmly secured in place, as that 'may' be the source of your rattle.
rick1024
Member
Yup, cant be tighter
if the sound is on the driver side there is a lot of access to the area already by simply pulling the cover panel off and looking/reaching inside the radio amp and misc stuff is in there along side the jack. the passenger side is mostly the rear hvac box
