Replace light bulbs with LEDs!?

[Nav792]

Has anyone had success yet not getting error codes for reverse or brake lights?

I did but used a resistor


Sent from my iPhone using Tapatalk

 

[d0wnShifT]

I did but used a resistor


Sent from my iPhone using Tapatalk

So you used the vled resistor on the brake and reverse light and don't get any codes, correct?

 

[Nav792]

So you used the vled resistor on the brake and reverse light and don't get any codes, correct?

I only needed 1 vled resistor for the reverse light. The turn signal led bulb worked without resistor. Haven’t tackled the brake light yet.


Sent from my iPhone using Tapatalk

 

[Bigmanny]

Your gonna need resistors for the reverse light. I order vled resistor for $15. You only need to put it on the left side. Just about any Led bulb will work with it. I ordered auxito for $20 from Amazon. All good now


Sent from my iPhone using Tapatalk

Where did you mount the resistor and by left you mean driver side?

 

[Nav792]

Where did you mount the resistor and by left you mean driver side?

Correct, drivers side. It’s pretty slim so I mounted it behind the tail light. It fit right in the grooves.


Sent from my iPhone using Tapatalk

 

[Joseph Garcia]

Has anyone had success yet not getting error codes for reverse or brake lights?

I put LEDs throughout my 07 Yukon XL Denali, inside and outside, without any resistors, and I never received any error codes. I do have hyperflash, which I am perfectly OK with.