Replaced the Brake Light Switch and the Cruise Control still shuts itself off.

[hoeguudr]

Hey all,

My 2010 Hoe is having the issue of the cruise control disengaging (like you tapped the brakes). Hitting the resume and she picks up where she left off.

I replaced the brake light switch and that was not the fix.

NO LED Brake lights in the mix but it does have LED reverse and DRLs.

Any ideas on what to check next?

Thanks!

 

[mikez71]

wheelspin will also cancel the cruise according to owners manual.. in addition to pressing the cruise set and cancel buttons.

 

[swathdiver]

Hey all,

My 2010 Hoe is having the issue of the cruise control disengaging (like you tapped the brakes). Hitting the resume and she picks up where she left off.

I replaced the brake light switch and that was not the fix.

NO LED Brake lights in the mix but it does have LED reverse and DRLs.

Any ideas on what to check next?

Thanks!

Did you use the GM switch or an aftermarket one? If the latter, use the former.

 

[hoeguudr]

It was supposed to be GM OEM but the coloring was different?
I've had RockAuto send me incorrect parts before so perhaps I will try another.

Thanks!

 

[hoeguudr]

wheelspin will also cancel the cruise according to owners manual.. in addition to pressing the cruise set and cancel buttons.

ironically, I also recently replaced the passenger front ABS sensor, too.

The ABS code reader I have called that one out after Traction Control and StabiliTrak errors.

 

[hoeguudr]

ironically, I also recently replaced the passenger front ABS sensor, too.

The ABS code reader I have called that one out after Traction Control and StabiliTrak errors.

If you're tracking, I found this:

Brake pedal sensitivity/cruise control issue with 2007 Yukon XL 1500 SLT

Had been having an issue with cruise control on my 2007 Yukon XL SLT 1500 where it would hit a bump and turn off or wouldn't come on unless the pedal was tapped on the side a couple times. Had read that this might be an issue with the brake light switch so i replaced it. Quick easy job but...

www.tahoeyukonforum.com

"movable pedal assy is known to have chaffing concern on harness. Move pedals back and forth to see if can induce. If so tape up harness at chaffed area"


I'll definitely look into this possibility.