Right side windows not working

[rcsboro]

Have a 04 tahoe right side windows not check fuse relays need direction

 

[Big Mama]

Take a rear window switch from left and see if it works on those windows. If so, a new switch is in order. If one goes bad others will follow.

 

[Rocket Man]

Both right side windows stopped at the same time? Have you tried using the switches at the right side doors and thereby ruling out the driver switch?

 

[OR VietVet]

Have a 04 tahoe right side windows not check fuse relays need direction

Say what? Welcome to the forum. The other members that responded must speak Tagalog. I am old. You have to help me, but I do understand that by what you said, and both members gave you great advice. If they went out at the same time, you did not say-right?, then is likely the master switch.

 

[Jobi-Wan Kenobi]

I may be a little late here but my switch for the drivers door wasn't working very well. I removed the switch and completely disassembled it and cleaned the circuit boards and rubber membrane with rubbing alcohol. The boards were definitely dirty and had a kind of grimy feel in some spots. Once I put it back together it was working fine. Lsx Matt on YouTube had a video about doing this too.

 

[nonickatall]

I had the same problem, untill I understood, that if you push the children save switch on the left side, that you as well switch off the passenger front window. Never saw that on a German car. A German wife would tell you some nasty words, if you switch off her window...



It's probably based on, that children in Germany are not allowed to sit in the front of a car until they are 12 years old. That is probably different in the United States. And so German cars never switch off the passenger front window...

But now i like it, because my wife is always a fresh air afficinado i and I like air conditioning. So sometimes I turn the switch off secretly and say: The passenger window doesn't work again darling? I have to look after that someday..

 

[yukonkink03]

I may be a little late here but my switch for the drivers door wasn't working very well. I removed the switch and completely disassembled it and cleaned the circuit boards and rubber membrane with rubbing alcohol. The boards were definitely dirty and had a kind of grimy feel in some spots. Once I put it back together it was working fine. Lsx Matt on YouTube had a video about doing this too.

I know this an old thread, but I did the same thing with my driver side switches. Alcohol and q-tips. The contacts were definitely dirty and this did the trick. Several videos on you tube. Saved me @ 130 bucks.