Rob's NBS Build

[RobbieX210X]

@PR RAY, @05Single beat me to it as I was about to try and answer that question.

@95escahoe as for the tints they are 20% I did try and match the factory to give it a finished look.

@Tonyrodz nobody has bothered me yet *knock on wood* but if I went any darker I probably wouldn't be able to see at night.

 

[PR RAY]

@blurred Hey when you took off the side steps (Neff bars) i also noticed you removed the plastic rocker molding did it leave holes in your Fender Flares? and was it hard to remove the side steps mounting bracket? Thanks

thanks @05Single

 

[RobbieX210X]

The Tow\Haul mode button hasn't worked in years. All of a sudden it started to go on by itself so you would have to tilt the steering column or shift from park to drive a few times to turn it off. I found that the wire has been severed from the shift stick so that might explain the button not working. I figured the other half of the wire was touching something to trigger Tow/Haul mode.

I decided to trace the wire and to my surprise I found the connection fairly easy and decided to just unplug it. You can see the wire sticking from the shift stick so I believe I unplugged the right wire. I don't tow with this truck so I don't need to spend any money to fix it. I found some small write ups on fixing this so maybe in the future I will fix this.

This took a total of 5 minutes.