Rob's NBS Build

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
RobbieX210X

RobbieX210X

Don't Hate! V Eight!
Joined
Mar 2, 2011
Posts
393
Reaction score
6
Location
New Jersey
OEM Cargo Cover!

Found a OEM Cargo Shade in the garage while looking for something else. Been searching for awhile. This one came out of our 2000 Tahoe. Wrong color but it fits!
 
OP
OP
RobbieX210X

RobbieX210X

Don't Hate! V Eight!
Joined
Mar 2, 2011
Posts
393
Reaction score
6
Location
New Jersey
Pulled the Alpine Radio unit out and put the factory one back in. Became unhappy with it after a few months.
 
OP
OP
RobbieX210X

RobbieX210X

Don't Hate! V Eight!
Joined
Mar 2, 2011
Posts
393
Reaction score
6
Location
New Jersey
Some minor updates over the past couple months. I had to have both front hubs replaced since one of them had worn out and the dealer factory warrantied the other one at no cost! :)

I did try to check the hubs myself but couldn't get to them but did find that I was missing a sway-bar link for who knows how long.

Driver Side
20151215_154828_zpspj7zfx5g.jpg

Passenger Side
20151215_154843_zpsbbkfm9nx.jpg

So I needed new ones. Dealer helped me out once again. Looks like something I could have done which would have saved a few bucks but they had it is the air already for the new front hubs.

20151228_085336_zpsoyelbb4m.jpg
20151228_085319_zps3dnw3kdi.jpg

Truck rides much better, handles better, and even turns better!

:happy107:
 
OP
OP
RobbieX210X

RobbieX210X

Don't Hate! V Eight!
Joined
Mar 2, 2011
Posts
393
Reaction score
6
Location
New Jersey
I was getting condensation in the headlights and I couldn't seem to seal them any which way I tried so I removed them. That, and I couldn't find a good matching rear set that would fit a Tahoe with Cargo Doors.

20160220_145353_zpsxbzfivy8.jpg

Just going to have to keep the stock lights.

20160220_154426_zpsrirdnwsr.jpg
 
OP
OP
RobbieX210X

RobbieX210X

Don't Hate! V Eight!
Joined
Mar 2, 2011
Posts
393
Reaction score
6
Location
New Jersey
I had the K&N Intake kit in for a couple years now and while I swapping my headlights I noticed that the intake tube was sitting higher than it should be turned out that it had shifted and wasn't even fully attached anymore. I had to pull it off and make some adjustments to the radiator fan shroud to stop the rubbing.

As you can somewhat see it is rubbing hard of the hoses.
20160220_145414_zpsnpjk9ygm.jpg

I gave it small clearance but to re-align it on my own was a little tough so after a week of driving it, the tube is rubbing again. Going to have to take another look at re-aligning it. :(

20160220_154314_zpsqtvbck23.jpg
 
Last edited:

05Single

afraid of the dark
Joined
Feb 26, 2015
Posts
8,186
Reaction score
11,456
Sucks about the lights, but still coming along nicely
 
OP
OP
RobbieX210X

RobbieX210X

Don't Hate! V Eight!
Joined
Mar 2, 2011
Posts
393
Reaction score
6
Location
New Jersey
So I had a friend help me re-adjust the intake and this time we got it to line up correctly. I also shaved the fan shroud a bit more to give it some extra clearance to avoid rubbing! So far so good!

20160228_130415_zps8ozndgnh.jpg

20160228_140051_zpsqlcvfoet.jpg

20160228_140044_zpsse38ygfy.jpg
 
Top