Roof rack removal

[wildwoodrver]

To get my Yukon into my tiny garage, I had to remove the roof rack. I think it acturally looks better without it and perhaps it will be a little quieter too.
My problem now is to trim up the holes in the roof.
Any ideas?
Thanks

 

[massivespl]

I just put the bolt back in the roof holes

 

[Mr. 960]

set screws

 

[1clean08denali]

I used socket head set screws from homedepot along with silicone and lock tight few days later I used the touch up paint from the dealer looks really good imo.

 

[southboundchicken]

I would fill and paint unless you plan to bolt it back on in the future

 

[TheAutumnWind]

I used socket head set screws from homedepot along with silicone and lock tight few days later I used the touch up paint from the dealer looks really good imo.

 

[Z-56 Hoe]

I shaved them on both our NBS Tahoe's

 

[Fosscore]

A little dirty, but here's what the holes look like sealed with the set screws as noted above in this thread.

Took M6 x 20 set screws at 10 quantity.

 

[1clean08denali]

Got any pictures?

I'm going to try this out this weekend I think.

As soon as the sun comes out I'll walk out and grab a few

 

[TheAutumnWind]

I pulled mine off last night. Much better without.

Just drove the stock screws into the holes. Which are somewhat noticable, but still better looking than with the rack.