Saving a few NBS'ssss

[Tonyrodz]

Like @TheWarBeast? Lol. Good luck catching him. I'm pretty sure he has about 230 of them.

Ain't that the truth! Nice, another build thread. Do they all have clean titles?

 

[drowssap]

Ain't that the truth! Nice, another build thread. Do they all have clean titles?

Yes! I normally do not mind branded titles but it sucks to own one here in Colorado. Before you get the vehicle inspected....you have to stamp "REBUILT FROM SALVAGE" into the B-pillar. The problem is that the metal is just a hollow tube and instead of stamping the metal....you just end up bashing it in.

 

[Rocket Man]

I also made sure to get my hands on one of these!!!

View attachment 187783

You can use that to turn on the fan pins in the ECU.

 

[Tonyrodz]

You can use that to turn on the fan pins in the ECU.

I was told that when a flash is done on the com you need to buy a pic e bae from gm to do it. Is that true? If so, would a license be needed to flash the pcm just for the fans?

 

[Rocket Man]

I was told that when a flash is done on the com you need to buy a pic e bae from gm to do it. Is that true? If so, would a license be needed to flash the pcm just for the fans?

IDK. I only know enough to get in trouble. Or get someone else in trouble.

 

[jerryjoe28]

quite a collection! defiantly need more info on the fan swap

 

[Rocket Man]

quite a collection! defiantly need more info on the fan swap

What do you need to know? I've done it. There's write-ups in the tech section. You can either use the OEM fans and harness out of the 05-06's or buy new fans and use an alternate harness although there's been issues with the aftermarket harnesses, as in melting. There's a member here (@ScottyBoy ) who sells the OEM harnesses and fans. Either way you need to plug a wiring pin into the PCM connector and have that pin activated so the PCM knows to control the fan.

 

[MadDogDelpho]

Looks like fun. Subbed!

 

[jerryjoe28]

What do you need to know? I've done it. There's write-ups in the tech section. You can either use the OEM fans and harness out of the 05-06's or buy new fans and use an alternate harness although there's been issues with the aftermarket harnesses, as in melting. There's a member here (@ScottyBoy ) who sells the OEM harnesses and fans. Either way you need to plug a wiring pin into the PCM connector and have that pin activated so the PCM knows to control the fan.

so basically I need a fan out of an 05-06 and the harness that gos with it. (guessing just remove the pins? (any idea on pin locations for 04?) then have my tuner turn the fans? is that just one of the system options on hp tuners? like where the AC controls are? im sure I can find all this info with a search but any info u could give would be appreciated

 

[Rocket Man]

so basically I need a fan out of an 05-06 and the harness that gos with it. (guessing just remove the pins? (any idea on pin locations for 04?) then have my tuner turn the fans? is that just one of the system options on hp tuners? like where the AC controls are? im sure I can find all this info with a search but any info u could give would be appreciated

Sure, I'll help you with a link to the tech section article. Read up. There's another one too from Scottyboy in there. All you have to do is stroll through the tech section, you don't even have to search. I have no idea about HP Tuners. I had BlackBear turn my pin on.
http://www.tahoeyukonforum.com/threads/how-to-install-e-fans.9400/