Service Stability System Warning

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
m1949

m1949

LS364/450
Joined
Nov 12, 2021
Posts
400
Reaction score
543
Location
MS Gulf
I think I found and corrected the problem. It was a bad chassis ground contact for ABS module located beneath driver side door. GM actually published a tech bulletin about this problem. I removed the ground, cleaned everything, tightened it back up using new nuts, washers and bolts mentioned in the bulletin then coated it with flex seal as per the bulletin. Haven't had the message come up since doing that!
 

adventurenali92

Full Access Member
Joined
Feb 16, 2015
Posts
7,388
Reaction score
8,618
Location
Big Bear Lake, ca
I think I found and corrected the problem. It was a bad chassis ground contact for ABS module located beneath driver side door. GM actually published a tech bulletin about this problem. I removed the ground, cleaned everything, tightened it back up using new nuts, washers and bolts mentioned in the bulletin then coated it with flex seal as per the bulletin. Haven't had the message come up since doing that!
Sweet! Cheap easy fixes like this are the best!
 

Marty_S

Member
Joined
Apr 5, 2024
Posts
34
Reaction score
19
Not sure what your goal was with this comment but ok.
Nothing like a good cornice jump. If it breaks drop into tuck and go, go, GO. Was not meant in any bad way. Been skiing for 65 years now and hit 70 last month. Hoping to get some days on my 223cm Super G boards this coming season.
 

Forum statistics

Threads
132,308
Posts
1,865,730
Members
96,897
Latest member
Trin
Top