Should I replace oil pressure sensor when replacing valve cover gaskets?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Rick10Tahoe

Member
Joined
Jun 11, 2012
Posts
42
Reaction score
32
2010 Tahoe LTZ, 5.3, 171k miles. I will be replacing my valve cover gaskets due to leaks. Should I should proactively change the oil pressure sensor even though I have no current issues with the original sensor? It doesn't appear to be leaking. Only reason I'd change it now is if it's easier to change the sensor with the valve cover off? Appears awfully tight back there. Thanks
 

Joseph Garcia

Supporting Member
Joined
Aug 2, 2018
Posts
8,018
Reaction score
11,084
Do you feel lucky? I generally think that if it ain't broke, don't fix it, unless it is a routine preventive maintenance item. My thought/recommendation would be to leave it alone.
 

rdezs

Full Access Member
Joined
Nov 6, 2023
Posts
346
Reaction score
517
At that mileage, maybe if you're pulling the intake to replace the intake gasket. But pulling the valve covers won't make much of a difference in accessibility.
 

swathdiver

Full Access Member
Joined
May 18, 2017
Posts
20,287
Reaction score
27,786
Location
Treasure Coast, Florida
2010 Tahoe LTZ, 5.3, 171k miles. I will be replacing my valve cover gaskets due to leaks. Should I should proactively change the oil pressure sensor even though I have no current issues with the original sensor? It doesn't appear to be leaking. Only reason I'd change it now is if it's easier to change the sensor with the valve cover off? Appears awfully tight back there. Thanks
I'm with Joe, don't touch it until it fails. My gaskets were replaced 3 years before the oil pressure sensor needed replacing.
 

j91z28d1

Full Access Member
Joined
Feb 28, 2022
Posts
3,715
Reaction score
4,597
What you could do is install a oil pressure relocation kit while you're back there and it's easy to install. And then reuse the sensor


Because the sensor will go bad and all the replacement sensors have a high failure rate too
 

Forum statistics

Threads
134,291
Posts
1,899,599
Members
99,775
Latest member
aph7649

Latest posts

Top