Slight clunk when making turn

[95escahoe]

So when I make a sharp left or right turn theres this slight clunk up front, balljoints, tie rod ends, pitman and idler arm, center link, all been done the last 2.5 years its greased every oil change, its done this for awhile hasn't gotten any worse, any ideas? Gonna get it looked at, besides that no other issues, tires are wearing fine, thanks for the help

Sent from my HTC One X using Tapatalk 2

 

[kcb37]

What do the control arm bushings look like?

 

[95escahoe]

What do the control arm bushings look like?

Not too sure ill have to crawl under there and look

Sent from my HTC One X using Tapatalk 2

 

[retorq]

No need to crawl under if it's 2wd, pop the hood and look, normally the top goes by by far before the lowers.

 

[95escahoe]

No need to crawl under if it's 2wd, pop the hood and look, normally the top goes by by far before the lowers.

Na its 4x4

Sent from my HTC One X using Tapatalk 2

 

[SunlitComet]

wear in the half-shafts?

 

[95escahoe]

wear in the half-shafts?

Maybe, I mean the trucks got 255k and change besides the stuff I did have no clue what was done, gonna look it over and see what I find and prolly take it to the shop Monday

Sent from my HTC One X using Tapatalk 2

 

[95escahoe]

Had it looked at and lubed it last oil change couldn't find anything wrong checked it all out

Sent from my HTC One X using Tapatalk