(Solved) Looking for Front, Center Jacking point 2015 Yukon Denali

[Jason in DLH]

So I was going to go Jack up the front center crossmember to lift both front wheels at the same time, but the darn plastic “skid plate” thing is in completely in the way (on my ‘07 I have plenty of room to Jack it up there).

I’ve heard on other forums that people simply Jack it up there without breaking the “skid plate”. Can anyone here confirm before I attempt this?

 

[Tonyv__]

I’ve done it. But I won’t take responsibility if yours breaks lol

 

[Jason in DLH]

I’ve done it. But I won’t take responsibility if yours breaks lol

It seems to be the general consensus that it won’t break. The heck with it! I’m doing it!

 

[STORMIN08]

i use either the front or rear portion of the cross member...never removing the plastic cover, 5 trucks later...no issues.

 

[Greg Kulbick]

I’ve done it. But I won’t take responsibility if yours breaks lol

Same.

 

[OR VietVet]

If you jack at the point where the skid plate attaches/bolts at the cross member, it will not break.

 

[Jason in DLH]

Thanks everyone!

I’ve done it. But I won’t take responsibility if yours breaks lol

i use either the front or rear portion of the cross member...never removing the plastic cover, 5 trucks later...no issues.

Same.

If you jack at the point where the skid plate attaches/bolts at the cross member, it will not break.