denalianyone
NYBlackLade08
I ordered and installed these. Will have to see how they hold up with my beefy Eibach sways. 
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Spohn Spherical end links
- Thread starter denalianyone
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Dantheman1540
Full Access Member
They look super nice. I'd love to get the full Spohn kit along with some beefy sway bars.
Lwile
TYF Newbie
Do you have a part number Will they work on a lowered Tahoe
OP
OP
denalianyone
NYBlackLade08
My truck is lowered with 2” spindles in the front. Part# SEL-19-416
Sent from my iPhone using Tapatalk
992dr
Full Access Member
Very cool, definitely an improvement over the threaded rod/bolt style.
Can you share the part number?
How adjustable are they? For the lower than 4" guys
Can you share the part number?
How adjustable are they? For the lower than 4" guys
randeez
Full Access Member
looks like you would just need to cut down the sleeve at the least. could cut the all thread if you wanted to but should work with it long
I have read they break off fairly often, I have been using the mevotech ttx they can tighten down to a pretty short length if needed (lots of thread) they utilize a additional inner metal sleeve and the bushings are extremely sturdy.
OP
OP
denalianyone
NYBlackLade08
I had those b4 and they are designed like the moog which snapped within a couple of months. I’ll see how long these swivel links last, they seemed to be designed better.
Sent from my iPhone using Tapatalk
OP
OP
denalianyone
NYBlackLade08
I purchased them from amazon and the customer service number should give you the part number for your truck which is lowered 2” more than mines.Very cool, definitely an improvement over the threaded rod/bolt style.
Can you share the part number?
How adjustable are they? For the lower than 4" guys
Sent from my iPhone using Tapatalk
StatutoryAPE
Member
I ordered and installed these. Will have to see how they hold up with my beefy Eibach sways.
Sent from my iPhone using Tapatalk
This is exactly what I was looking for. I have same sway bar and I hate my long stock end links. I also hate the angle the sway bar sits. Which makes me wonder if this spohn link can be installed upside so the bushings are flat on the LCA. I feel like the bushings will wear out way faster if not. I tried ES end links that are 2" shorter but the bar doesn't line up when you bring it down.
Similar threads
