Squeaks and Creeks after Leveling Kit…

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Dantheman-2003

Full Access Member
Joined
Jan 3, 2022
Posts
143
Reaction score
146
Location
Placerville, Ca
So I installed a leveling kit on my 03 Tahoe. New keys, shocks, upper control arms and tie rods. I’m overall happy with it until I go bigger.

One thing that bugs me though is the squeaking from underneath. Sounds like an old spring bed mattress. Creek creek… squeak squeak… increases when I go over bumps… hard to tell exactly where it’s coming from, but definitely in the front. Anyone familiar with this or know of any remedies?
 

Attachments

  • IMG_4075.jpeg
    IMG_4075.jpeg
    113.1 KB · Views: 3

Alex_M

Full Access Member
Joined
Sep 27, 2021
Posts
376
Reaction score
678
Did you settle the suspension before tightening up the bolts thru all the bushings? If you tightened them while it was still up in the air then all the bushings are bound up, may be the cause of your issue.

Also, did you grease those ball joints and tie rod ends?
 

DirtDigler

Full Access Member
Joined
Jan 17, 2021
Posts
143
Reaction score
118
I had an annoying squeek going over bumps. I finally tracked it down to the front sway bar end link bushings. No more squeeks.
 

Attachments

  • 20220424_143342.jpg
    20220424_143342.jpg
    282.7 KB · Views: 9
  • 20220924_181508.jpg
    20220924_181508.jpg
    166.5 KB · Views: 9
OP
OP
Dantheman-2003

Dantheman-2003

Full Access Member
Joined
Jan 3, 2022
Posts
143
Reaction score
146
Location
Placerville, Ca
I had an annoying squeek going over bumps. I finally tracked it down to the front sway bar end link bushings. No more squeeks.
Good deal. I replaced my swag bar links when I did the kit. I’ll get under there this weekend and check it out. Will report back my findings.
 

Sam Harris

Supporting Member
Joined
Sep 26, 2018
Posts
7,431
Reaction score
14,924
Location
Texas
I had a nagging squeak (which has returned about 2 years later and need to investigate..), and it just turned out to be my passenger lower control arm bolts. They were tight af, but tightening them a little more made my squeak go away. Everything torqued to spec? Almost 100% of my front end was replaced when I bought it in 2018, but those parts and bushings are likely getting pretty worn, especially with my level.
 

Forum statistics

Threads
132,717
Posts
1,873,138
Members
97,542
Latest member
RRogerson
Top