OP
OP
I adjusted it a little today and it seems a little better. I will keep an eye on it but it works for now
steering gear box replacement
- Thread starter bowtiefreak
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
qukon 95
Full Access Member
- Joined
- Apr 7, 2011
- Posts
- 556
- Reaction score
- 5
changing mine that i got in jan 2011 couldn't get a wheel aligment
sat oh!! and idler arm and pulling the gear box out the front is easer.
sat oh!! and idler arm and pulling the gear box out the front is easer.
the big blue bus
Full Access Member
how exactly do you adjust it? i see the spot but its kinda ow at the bottom. mine has so much play it seems lik its the column though. its going to be awful when i get these 35s on
OP
OP
There are two spots to adjust. One is tightening the bearing were the shaft enters teh box and the secon is a screw on the top of the box. There is a good write up on this at FSC....but a few other places too if you look. Search for steering box adjustment on google and you will find a write up
