Stuck Shackle Bolts

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

njJohn

Member
Joined
Jan 21, 2011
Posts
96
Reaction score
3
Location
Aberdeen, MD
My bolts are stuck/seized in the spring bushings. Any solution? I spayed the hell out of them for a week before trying to loosen them. The nuts do come off. I want to lower my Blazer and just may opt to get lowering leafs and cut all my bolts out.
 

bowtiefreak

No Quarter
Supporting Member
Joined
Apr 30, 2009
Posts
5,404
Reaction score
100
Location
Near Philly
a hammer. I had the same problem on my passenger side, I still think the exhaust being close to the shackle played a part in this
 

ezdaar

Chat Troll
Supporting Member
Joined
Jul 28, 2010
Posts
3,715
Reaction score
125
Location
Redneck central, Aka Houston
Take spring pressure off them, lift vehical by frame untill theres no tension on the bolts.
You may need a small pry bar to assist taking pressure off bolt, unless youget the lift just right..
 

retorq

Full Access Member
Joined
Mar 4, 2010
Posts
3,018
Reaction score
10
Location
Kingman AZ
Take spring pressure off them, lift vehical by frame untill theres no tension on the bolts.
You may need a small pry bar to assist taking pressure off bolt, unless youget the lift just right..

Ohh god I hope he's not trying to take them out with the springs still supporting the load of the truck.
 

95TwinTT

Full Access Member
Joined
May 23, 2009
Posts
357
Reaction score
0
Location
Minnesota
Could be the bolts are rusted to the sleeves inside the spring rubber.

Look close to see if the sleeve is turning with the bolt..........
 

AtomicHoe094

Atomichoe094
Joined
Apr 30, 2009
Posts
8,179
Reaction score
7
Location
cleveland, OH
Could be the bolts are rusted to the sleeves inside the spring rubber.

Look close to see if the sleeve is turning with the bolt..........

Ive had that problem before.. lol I think i just heated the rubber and pulled it all out to change the bushings anyways.
 
OP
OP
njJohn

njJohn

Member
Joined
Jan 21, 2011
Posts
96
Reaction score
3
Location
Aberdeen, MD
Dosen't the bushing have to be pressed in? I keep reading guys saying "I bought shackles and it looks great." I bought schackles and got a small nightmare/project. I brought my Blazer to my bud's shop. He does mainly lifted stuff and instalations(lowered imports) for a local speed shop. I can tell he really didn't want to get involved with it and ruining the bushings or something. I got the lowering itch, again!
 

AtomicHoe094

Atomichoe094
Joined
Apr 30, 2009
Posts
8,179
Reaction score
7
Location
cleveland, OH
I just put brand new bushings in the leaf springs. didnt need those pressed in.. I dont think you need them pressed in for the shackles either.. BTW i have a set of shackle bushings for sale in the classifieds sections. Prothane brand, good stuff, check it out.
 

Forum statistics

Threads
132,723
Posts
1,873,220
Members
97,554
Latest member
Carlos123
Top