Swapped my rear 1" spacer for Moog 80169.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

akbrener

Full Access Member
Joined
Mar 20, 2012
Posts
332
Reaction score
158
Location
Baltimore, MD
Just wanted to confrim for anyone needing an inch out back that the MOOG 80169 "HD" springs are good to go for 2015+

I had these springs on my 2008 and just put it back at factory height. put the moog's on my 2019 and i think they are almost exactly the same as factory springs with 1" spacer. Biggest difference is the firmer ride. not harsh at all, but feel like the rear is more stable. I have 12 "speed humps" in my neighborhood and the difference is amazing.

I would think that a NEW set of springs may be a bit higher, these have close to 50K miles on them. Also still have factory shocks so paired with a set of Bilsteins I think it will be a great combo. (coming soon)

Forgot to take pics, but here is my ride with a Rough Country front 2" and 1" rear.

92997172_784209352071_8014529224830353408_o.jpg
 
OP
OP
A

akbrener

Full Access Member
Joined
Mar 20, 2012
Posts
332
Reaction score
158
Location
Baltimore, MD
My shocks are still factory, ride height maybe went down 1/4” at most compared to a 1” spring spacer.

biggest difference is that they are noticably stiffer.. not harsh, but do not have the same "smooth ride" plush feel when going over bumps. Bilsteins are in the plans for this thing, so it should only get better
 
Top