Tahoe LTZ chrome wheels - nasty marks - help needed

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

mountie

Supporting Member
Joined
May 9, 2018
Posts
4,561
Reaction score
8,302
Location
Wellington, Fl., (formally Kalifornia)
all 4 have similar marks. some are covered in this crap. some have a bit less. thats why i am assuming its not clear coat failure on all 4...
The one wheel, shows the 'damage' on just half of the wheel. Are the other wheels sort of the same? Possible damage caused by a harsh acidic cleaner was sprayed along the ground, and splashed onto your wheels? I am guessing the clearcoat did not fail, but the clearcoat has been damaged? (( " clearcoat = powdercoat " ))
Try a test area on the wheel, to clean, and show us the result.
 

NELLY1947

Member
Joined
Dec 4, 2023
Posts
50
Reaction score
32
It’s just clear coat failure. Could be from bad prep or just environmental conditions.

I doubt it’s calcium, but if you think so go look at a product called CLR. That’s for bathrooms but I’d look into it to see if it can be used on wheels either straight or diluted.
Screenshot_20241118_104632_Google.jpgWe used to use this kn the side covers of my Norton 50 years ago. Then my Harleys. They looked like chrome. If no go send the wheels to a powder coating shop. A good one will straighten and tune the wheels at the same time.
 

mountie

Supporting Member
Joined
May 9, 2018
Posts
4,561
Reaction score
8,302
Location
Wellington, Fl., (formally Kalifornia)
View attachment 442768We used to use this kn the side covers of my Norton 50 years ago. Then my Harleys. They looked like chrome. If no go send the wheels to a powder coating shop. A good one will straighten and tune the wheels at the same time.
The wheels are coated. Polish will not buff-out the defects, until the aluminum is stripped of the coating. Having said that, the wheels MIGHT be chrome plated, then coated? Then he'll need just a chrome cleaner.... AFTER THE COATING IS REMOVED.
A TON OF WORK...... Unless you send the wheels to a wheel restorer.
 
Last edited:

Blanch44

Member
Joined
Sep 29, 2016
Posts
40
Reaction score
33
Location
Oswego New York
If it were me I would get tires off and get them, blasted and powder coated Gloss Black. I did this with my old LTZ style Rims lasts for years .
 

Attachments

  • 20240223_124426.jpg
    20240223_124426.jpg
    289.6 KB · Views: 1

Forum statistics

Threads
132,243
Posts
1,864,626
Members
96,787
Latest member
kustommf
Top