Tahoe stalls when warm

[Jim Adler]

From what I’ve seen no it can’t, but where there’s there’s a way. I’m sure someone out there has figured out how, but it wasn’t the right way. I’m actually ordering from Amazon but I’m getting AC Delco so it should be fine.

***Where there’s a will there’s a way.

 

[Jim Adler]

You do not want to cheap out for those parts. Generic aftermarket parts will leave you stranded.

Took ur advice and decided to get the more expensive ones

 

[OR VietVet]

You will be happy you made that choice.

Just to be clear, if I was selling a rig or in an emergency for sure and needed to fix a problem, I would buy cheap and cross my fingers. If I am keeping the rig, go with what got me here after over 100k miles. To me, it's a no brainer.

 

[TollKeeper]

From what I’ve seen no it can’t, but where there’s there’s a way. I’m sure someone out there has figured out how, but it wasn’t the right way. I’m actually ordering from Amazon but I’m getting AC Delco so it should be fine.

I have learned the hard way, dont order parts from Amazon. I got O2 sensors for my V8 Envoy, and they come in a box that looked like ACDelco, but once you started looking at the box, and the print on the box, and the mis-spelling of words.. Well it wasnt ACDelco parts.

Go for NGK/NTK (supplier for ACDelco), or ACDelco from a local parts warehouse. That way if there is a issue, the fix is faster.

 

[OR VietVet]

Or RA. So far I have only ever ordered Genuine GM parts from Amazon with no problems.

 

[Jim Adler]

Or RA. So far I have only ever ordered Genuine GM parts from Amazon with no problems.

I just ordered an ac delco one and it was like $45 plus tax and shipping, right around $55. It was more than twice the price of the cheap one, but I feel much better about longevity of it. Anyway part will be here Saturday. I’ll post again with updates.

 

[Jim Adler]

The crankshaft position sensor just arrived. Hopefully this fixes it. Fingers crossed.

 

[Jim Adler]

The crankshaft position sensor just arrived. Hopefully this fixes it. Fingers crossed.

So there’s a re-learn procedure ur supposed to do after replacing the sensor. I don’t have a nice scanner, what should I do?

 

[Jim Adler]

So there’s a re-learn procedure ur supposed to do after replacing the sensor. I don’t have a nice scanner, what should I do?

 

[ks03]

I don’t know of any shortcut for doing a cam crank variation relearn. If you can’t find someone with a tool capable, you’d need to take it to a shop that can. It’s something that could potentially be done on the service drive