The KidWagon

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
KidWgn

KidWgn

Certified Kid Hauler
Joined
Jan 11, 2023
Posts
351
Reaction score
470
Location
St. Louis, MO
Aren't drop shackles for leaf springs?
May be the wrong terminology. It’s what I’ve always called it though; it’s used to drop the location of the shock, and another to drop the location of the lower trailing arm. Pic attached of the trailing arm shackle
 

Attachments

  • IMG_0083.jpeg
    IMG_0083.jpeg
    396.8 KB · Views: 4

kbuskill

***CAUTION*** I do my own stunts!
Joined
Mar 11, 2017
Posts
5,306
Reaction score
8,313
Location
NE. FL.
I still have my sensors and whatnot. Did you keep the factory air shocks, or did you retrofit bags?

If you kept the factory air shocks, I'm assuming you're using a 4" drop shackle?

I do have the axle relocation brackets similar to the ones pictured.

I researched and found an aftermarket air shock with the same collapsed/extended length as the Belltech drop shocks and ran those.

They rode nice, my only complaint was if you get into a situation where there is a repetitive bounce, like when coming off of certain bridges, they were softer than I liked.
 
OP
OP
KidWgn

KidWgn

Certified Kid Hauler
Joined
Jan 11, 2023
Posts
351
Reaction score
470
Location
St. Louis, MO
Pictures as promised. This is with the axle sitting at ride height.
IMG_0148.jpeg
Here’s the clearance on the diff cover. It’s around .200-.250
IMG_0149.jpeg
View looking up, top of picture is forward.
 
OP
OP
KidWgn

KidWgn

Certified Kid Hauler
Joined
Jan 11, 2023
Posts
351
Reaction score
470
Location
St. Louis, MO
OP
OP
KidWgn

KidWgn

Certified Kid Hauler
Joined
Jan 11, 2023
Posts
351
Reaction score
470
Location
St. Louis, MO
Good to see you tinkering KW.
Always tinkering brother! Work has just been nuts, so I haven't been posting much. I'm about to tear my front suspension apart again. I finally figured out the issue. The front coilovers' struts are too short, which is why I had to crank the spring perches up so high. I'm going back to OE spindles with the coilovers, which should resolve a lot of the issue. Hopefully it resolves the RF wheel jutting outboard, too.
 

Forum statistics

Threads
132,159
Posts
1,863,261
Members
96,660
Latest member
walkerheartsfield
Top