oathbringer
TYF Newbie
- Joined
- Dec 4, 2023
- Posts
- 27
- Reaction score
- 59
Gotcha, thanks for the info and quick reply.
The twin hoes
- Thread starter Sparksalot
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Gotcha, thanks for the info and quick reply.
mountie
Supporting Member
I was just at a salvage yard... 95% of all GM suv's didn't have much of the front end usable parts left. But I was surprised how many good 'under-hood' plastic parts were left.
Our 5 local UPull yards generally don't have any GMT900s. Have to visit a regular junkyard to get parts from those.
mountie
Supporting Member
The West Palm Beach Pick Ur Part had at lease 12 of our Suv's & a bunch of similar style trucks.
OP
OP
Sparksalot
Supporting Member
This was the rear impact bar. PPV units don’t have the trailer hitch.
mountie
Supporting Member
From what I saw, most of the rear bumpers were still attached..... Or totally bashed in !!
oathbringer
TYF Newbie
- Joined
- Dec 4, 2023
- Posts
- 27
- Reaction score
- 59
The other issue i've found with the ones i've been able to locate is the amount of rust on them and how much these places want for the part itself. I'm not paying $250 for 12yrold rusted impact bar that I have to pull and transport myself.
mountie
Supporting Member
Like me,...... You are "shopping"..... ( You might try a large dealership - body shop yard )
OP
OP
Sparksalot
Supporting Member
Next step in my ongoing battle with underhood heat in thethirdtwin.
I bought an H3 louver from Rodlouvers. Etching primer and finished with bed liner to match the hood.
I bought an H3 louver from Rodlouvers. Etching primer and finished with bed liner to match the hood.
OP
OP
Sparksalot
Supporting Member
Laid out, then ventilated. The aluminum skin was easier than the steel of thecopcar.
