Tighten up play in steering

[bikerglasses]

Where should I start looking? Steering has about 2" of play in it.

Sent from my DROIDX using Tapatalk 2

 

[M Hankel]

Where should I start looking? Steering has about 2" of play in it.

Sent from my DROIDX using Tapatalk 2

Tie rod ends for sure, and any intermediate links with the steering linkages. Would be a good time to inspect the upper/lower ball joints on the arms as well.

Mike

 

[cowtownyukon]

Tie rod ends for sure, and any intermediate links with the steering linkages. Would be a good time to inspect the upper/lower ball joints on the arms as well.

Mike

+1

Take a look at idler arm and Pitman arm also.

My truck is in to replace all the above right now

 

[bikerglasses]

Never did this before, what should I be looking for?

I expect some wear issues since truck has 105k and a 6" lift. If the parts aren't too expensive I wouldn't mind changing them all out, depending on how hard it is to do.

Sent from my DROIDX using Tapatalk 2

 

[bikerglasses]

What kind of difference would I see if I added a steering stabilizer?

Sent from my DROIDX using Tapatalk 2

---------- Post added at 09:26 AM ---------- Previous post was at 08:41 AM ----------

any reviews on this:

http://store.sevensaturdays.com/cst-css-c24-8-kit.html