Tonyrodz's Tahoe Build Thread

[NoReverseYukon]

If I am remembering correctly, to remove the fan blades I increased tension on the belt which held the pulley from spinning.

 

[Tonyrodz]

If I am remembering correctly, to remove the fan blades I increased tension on the belt which held the pulley from spinning.

I put the C clamp on the belt, but it didn't work for me.
@NoReverseYukon I need your info for an srs sensor. Just need 1.

 

[iamdub]

...Are you sure you were turning it in the right direction?

He should be turning it in the left direction.


@Tonyrodz, set down your purse, kick off those pumps, pretend it's your mechanic buddy and get buckwild.

 

[Tonyrodz]

He should be turning it in the left direction.


@Tonyrodz, set down your purse, kick off those pumps, pretend it's your mechanic buddy and get buckwild.

Were you looking in my bedroom window--I'll scratch your eyes out! YOU'RE SILLY

 

[915_Tahoe]

I've seen videos where people don't use shit to hold the belt or pulley, just a wrench hit with hammer and there done.

I did the same but didn't work at alI, then i noticed there were a couple of holes in the water pump pulley. "This is were the hours glass starts to spin in my head". I got a coat hanger ran it through the pump and wrapped it around the alternator, got a wrench with a jack handle on it whacked it with a hammer and got it to break loose.

 

[Tonyrodz]

I've seen videos where people don't use shit to hold the belt or pulley, just a wrench hit with hammer and there done.

I did the same but didn't work at alI, then i noticed there were a couple of holes in the water pump pulley. "This is were the hours glass starts to spin in my head". I got a coat hanger ran it through the pump and wrapped it around the alternator, got a wrench with a jack handle on it whacked it with a hammer and got it to break loose.

Did you wack it to the left or to the right Rene?

 

[Dantheman1540]

You could cut the fan itself off with a grinder/sawzaw then put an impact with a socket on the shaft and give it some dugga duggas.

 

[Tonyrodz]

You could cut the fan itself off with a grinder/sawzaw then put an impact with a socket on the shaft and give it some dugga duggas.

No I don't want to do that.

 

[Dantheman1540]

No I don't want to do that.

I wouldn't want to either but it is an option lol.

 

[Bear77]

I've seen videos where people don't use shit to hold the belt or pulley, just a wrench hit with hammer and there done.

I did the same but didn't work at alI, then i noticed there were a couple of holes in the water pump pulley. "This is were the hours glass starts to spin in my head". I got a coat hanger ran it through the pump and wrapped it around the alternator, got a wrench with a jack handle on it whacked it with a hammer and got it to break loose.

Did you wack it to the left or to the right Rene?

To the left/passenger side of vehicle to loosen it


Sent from my iPhone using Tapatalk