Torque specs for rear suspension? 13 Tahoe LTZ

[Atrevino0497]

I’m going to be doing an extensive tuneup to my Tahoe as she’s nearing 160k. She doesn’t ride as nice as she used to.

Plugs + wires, engine filter, front and rear diff fluid, new transmission pan with drain plug, new trans filter and fluid, transfer case fluid, brakes and rotors then suspension components and alignment

I need help with torque specs for rear suspension, I’m deleting the auto ride in the front with resistors but keeping the rear factory

Front:
Kyb struts
upper control arms (replaced lowers last yr)
Sway bar links
Inner and outer tie rods

rear:
upper and lower control arms
Stabilizer bar links + bar bushings
Rear Lateral link
Shocks (factory air ride)

Thankyou

 

[Doubeleive]

REAR SHOCKS 85FT LBS
REAR UPPER CONTROL ARM 118FT LBS
REAR LOWER CONTROL ARM 74FT LBS +55deg
rear sway bar 48ft lbs + 40deg
rear panhard bar, just make it as tight as you can reasonably get it otherwise it may make popping noise
def 80+ft lbs

 

[Atrevino0497]

REAR SHOCKS 85FT LBS
REAR UPPER CONTROL ARM 118FT LBS
REAR LOWER CONTROL ARM 74FT LBS +55deg
rear sway bar 48ft lbs + 40deg
rear panhard bar, just make it as tight as you can reasonably get it otherwise it may make popping noise
def 80+ft lbs

Thankyou very much ! I really appreciate this, I cannot wait to get started and feel the improvement