Torsion Crank and Blocks

[thehulk]

I have a 99 tahoe LT 4x4 and just put some 285/35/r16 trail-diggers on it. they fit just fine and work amazing. I would like to raise the truck just enough so its noticeable but not too high that i need to by new tires to make it look right. i was thinking of tightening the T bars and putting a 2 inch block in the back. what all do i need to do to do this and does anyone have some pictures. Also rough country sells a Leveling kit for a 1500 silverado ( http://www.roughcountry.com/gm-leveling-lift-kit-283n2.html ) Would this fit my tahoe and do i need to put the keys in.

 

[Bottoms Tahoe]

I have a 96 tahoe with the torsion bars cranked 1-1/2" with a 1" block in the rear. My 285/75/16 tires fit fine. A little scrubbing at full lock.

 

[Chezoom]

Where did you pick the 1'' block up at?

 

[Bottoms Tahoe]

I got it off of eBay.