Tranny help

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

TylerP53

TYF Newbie
Joined
Jul 16, 2024
Posts
1
Reaction score
0
So when I put my transmission manually in 1st gear it revs high for a sec then feels like it’s shifting into 2nd. Then back to 1st. Anyone know what could cause this?

I only do it when I take it in the mud
 

Joseph Garcia

Supporting Member
Joined
Aug 2, 2018
Posts
7,340
Reaction score
9,921
Welcome to the Forum from NH.

Lots of knowledgeable folks here who freely share their knowledge, experiences, and perspectives. Knowledge is power.

I hope that you will become a participating member in the Forum's discussions.

Pics of the truck, please.

@NickTransmissions is our resident transmission expert, and he will chime in with his thoughts and perspectives.
 

NickTransmissions

Sin City
Supporting Member
Joined
Mar 9, 2023
Posts
1,088
Reaction score
2,613
Location
The transmission bench
So when I put my transmission manually in 1st gear it revs high for a sec then feels like it’s shifting into 2nd. Then back to 1st. Anyone know what could cause this?

I only do it when I take it in the mud
If your rpms climb high enough in manual low, trans will force an upshift to second gear to protect engine and trans from damage. You need to do a gear command mod, which would give you manual low at any speed and rpm. Transgo reprogramming kits have these mods/parts so install that kit for your transmission and you wont have forced upshifts out of manaul low any more.
 

Marky Dissod

Full Access Member
Joined
Mar 3, 2023
Posts
1,896
Reaction score
2,598
Location
(718)-
So when I put my transmission manually in 1st gear, it revs high for a sec, then feels like it’s shifting into 2nd, then back to 1st.
Anyone know what could cause this?
I only do it when I take it in the mud.
How fast are you going (MpH) when you shift manually into 1st?
You may be going fast enough to be on the pcm's border between 1st & 2nd.

Good idea to refresh ATF.
 

Forum statistics

Threads
132,311
Posts
1,865,742
Members
96,899
Latest member
mohd33303
Top