Transmission maintenance

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Oziel

TYF Newbie
Joined
Feb 21, 2018
Posts
8
Reaction score
2
I have a 2003 yukon xl slt with 236k on it, I'm slowly but surely fixing it up but I'm not sure if to do a transmission fluid change at this high mileage, I have no previous service record for it but I've had it for 6 months and have no transmision problems whatsoever, it's my daily driver, so I'm wondering if changing it would cause any damage to the tranny.

Also the transmission fluid is still lightly red/brownish color

Sent from my LGMP450 using Tapatalk
 

MDJR

Member
Joined
Mar 24, 2011
Posts
61
Reaction score
8
Location
IL
I think you'd be ok to drop the pan and change the filter. However in my experience I'd advise against a transmission flush. If the fluid still looks decent that is good.

Sent from my SCH-I535 using Tapatalk
 
OP
OP
O

Oziel

TYF Newbie
Joined
Feb 21, 2018
Posts
8
Reaction score
2
I think you'd be ok to drop the pan and change the filter. However in my experience I'd advise against a transmission flush. If the fluid still looks decent that is good.

Sent from my SCH-I535 using Tapatalk
Would I be okay with buying a filter from like a local store like autozone or does it have to be a specific brand filter only available from a website or a dealer, and also be okay using castrol transmax dexron vi premium synthetic blend

Sorry for sounding like a newbie it's just that I had one bad experience with changing the filter and fluid on one of my old vehicles, let's just say it never shifted the same again

Sent from my LGMP450 using Tapatalk
 

MDJR

Member
Joined
Mar 24, 2011
Posts
61
Reaction score
8
Location
IL
I like Napa for the filter and gasket. Make sure the gasket is rubber at least they work way better than cork. As for fluid as long as it's dex 5 or better I believe you're fine. I have a plug on my pan so I drain it every year out of convenience. I would check the manual on the fluid though I can't remember off hand.

Sent from my SCH-I535 using Tapatalk
 

Chubbs

Full Access Member
Joined
Jun 24, 2017
Posts
634
Reaction score
391
The manual calls for Dex-3 but that was superseded by Dexron-6 back in 2006 or so. Dex6 is backwards compatible & light years ahead of Dex3 in all aspects including protection & lubrication.
 
OP
OP
O

Oziel

TYF Newbie
Joined
Feb 21, 2018
Posts
8
Reaction score
2
Did the fluid change, luckily I didn't mess anything up or have any slippage between 2-3 after doing it[emoji119]

Sent from my LGMP450 using Tapatalk
 

Big Mama

Full Access Member
Joined
Jul 21, 2015
Posts
3,416
Reaction score
2,098
Location
Virginia
Here’s what my tranny guy says. Do a flush if under 150k AND NO PROBLEMS. Sorry for yelling. He won’t do one and tries to stay away from fluid changes on them too. I’m not sure I agree with that. If the fluid is good drain or drop it get a good filter and gasket and measure how much you take out so you know how much to put back and look for any metal in the pan. Stay away from tranny fix products no matter how shiny the bottle.
 

Pittz

Full Access Member
Joined
May 8, 2017
Posts
136
Reaction score
56
No flush, but you will be fine with a drain/fill/new filter. You will notice a difference. I would do the same in front and rear diff.
 

Forum statistics

Threads
132,762
Posts
1,873,788
Members
97,592
Latest member
shadowid60
Top