Turbo Tahoe?

[01FormulaTA]

Grab a set of these and you can use those injectors with your fuel rail....

https://www.ebay.com/itm/L92-L99-L76-L98-LS9-EV14-LSA-fuel-injector-adapter-spacer-to-LS2-EV6-Manifold/222153154853?hash=item33b95c2125:g:ucsAAOSwhOVXc7yN&_sop=16&_pgn=2&_sacat=0&_nkw=LS+injector+adapters&_from=R40&rt=nc

 

[about20ninj45]

You just need injector spacers

 

[Tonyrodz]

Grab a set of these and you can use those injectors with your fuel rail....

https://www.ebay.com/itm/L92-L99-L76-L98-LS9-EV14-LSA-fuel-injector-adapter-spacer-to-LS2-EV6-Manifold/222153154853?hash=item33b95c2125:g:ucsAAOSwhOVXc7yN&_sop=16&_pgn=2&_sacat=0&_nkw=LS+injector+adapters&_from=R40&rt=nc

Pretty handy.

 

[Rocket Man]

What injectors are you planning on running? Flow rate? Here's a good link on the differences. I went with Delphi 12613412's that flow at 50 lb/hr and they were cheap. http://www.lt1swap.com/identify_vortec_engine.htm

 

[ibfreeman88]

Ended up ordering a set of the adapter spacers hopefully everything will show up Friday or Saturday. If not then I guess I'll continue as I have been

 

[00'BlueSteel]

Postive note, it sounded mean in that video clip. And looks like you got a couple final bugs to work out and she should be up and running. Hope the spacers work, you’ve put in some serious time, money, and work to get to this point and it’s looking good bud.

 

[bottomline2000]

View attachment 203968 Just too keep you guys updated since y'all have kept me all going thru this process intake manifold and everything is off about to remove this T and try and get it sealed up for good.

Would the oil pressure read low since the t fitting is bleeding off pressure to the turbo? Not necessarily meaning overall pressure is low, just the sensor reading low?

Sent from my SAMSUNG-SM-T377A using Tapatalk

 

[ibfreeman88]

Postive note, it sounded mean in that video clip. And looks like you got a couple final bugs to work out and she should be up and running. Hope the spacers work, you’ve put in some serious time, money, and work to get to this point and it’s looking good bud.

Appreciate the kind words as always. But yeah I'm hoping they work out as well with no leaks. I'm getting sick of wrenching because unfortunately most of the people I know just want to enjoy the final product of my headches and money, but have no interest in lending a hand, be it holding a light or just coming by and talking for a few while I work on it.

 

[ibfreeman88]

Would the oil pressure read low since the t fitting is bleeding off pressure to the turbo? Not necessarily meaning overall pressure is low, just the sensor reading low?

Sent from my SAMSUNG-SM-T377A using Tapatalk

Doesn't appear so. My gauge still reads the same as it did before if I recall correctly. I was wondering the same prior to install but all appears normal.

 

[Tonyrodz]

Appreciate the kind words as always. But yeah I'm hoping they work out as well with no leaks. I'm getting sick of wrenching because unfortunately most of the people I know just want to enjoy the final product of my headches and money, but have no interest in lending a hand, be it holding a light or just coming by and talking for a few while I work on it.

I'd help ya out if you were local buddy