Vette servo???

[danimalmax]

i dont know what i would do without you guys

 

[Chris]

Hahaha same here bro, I would be tearing shit apart without a clue.

 

[danimalmax]

Okay I got my vette servo today and according to the write ups I need to rub a little fluid on the parts so bare metal doesn't touch bare metal, but where do I get some? Do I have to go buy some from auto zone or something?

---------- Post added at 07:51 PM ---------- Previous post was at 06:42 PM ----------

any quick answers would be greatly appreciated, then i might start on this tonight

 

[Sasquatch]

i`ve been thinking about getting a servo for my yukon but i was wondering if i put one in how hard it would shift? when i got my blackbear tune justin maxed out my transmissions line pressure and it now has nice firm shifts. i just wanted to ask if anyone has both a bb tune and a servo and how hard the shifts are with both.

 

[danimalmax]

good question sasquatch, i'd like to know myself as i will be installing my servo maybe tomorrow or something, then later on i will get a BB tune also

---------- Post added at 10:34 PM ---------- Previous post was at 09:31 PM ----------

hey guys, should i go ahead and add this on with my servo as well?

http://cgi.ebay.com/ebaymotors/700r...015QQitemZ250408224022QQrdZ1QQsspagenameZWDVW

 

[withac]

The 'Vette servo will only firm up the 1-2 shift. It won't make it bang, just a real good firm shift. Best bang for the buck mod out there. You should be able to buy the servo and both o-rings for under twenty bucks.

I have the 'Vette servo and BB tune, had the servo before the tune so it was tuned for the servo. If you put a 'Vette servo in it after the tune I think you would want to get a re-tune. Email Justin and ask him. He's real helpful.

 

[Chris]

good question sasquatch, i'd like to know myself as i will be installing my servo maybe tomorrow or something, then later on i will get a BB tune also

---------- Post added at 10:34 PM ---------- Previous post was at 09:31 PM ----------

hey guys, should i go ahead and add this on with my servo as well?

http://cgi.ebay.com/ebaymotors/700r...015QQitemZ250408224022QQrdZ1QQsspagenameZWDVW

I'll let someone else comment on the 4th gear servo, I have talked to some people who installed it also, but I'm not 100% on if its worth it or not. As far as putting some oil on the servo before install, run up to atozone and grab some trans fluid to add

 

[danimalmax]

Thanks for the responses guys! As for the 4th gear billot servo, there seems to be nothing but positive comments about it over at performance trucks

 

[06Z71]

i have the fairbanks 1-2 superservo and 4th apply servo, i love them, nice clean quick shifts, no more slip shift

 

[Drgnblood]

So i just got my servo....but im on duty again...so i dont know when im going to install.....maybe monday but i will let you guys know how its working...