Vette servo

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

tmeier

TYF Newbie
Joined
Sep 28, 2009
Posts
2
Reaction score
1
Saw some posts about the adding a Vette servo to the the 4L60-E tranny. Looking for some feedback. Good mod? Any problems with it?
 

blueflamed03

Supporting Member
Joined
May 4, 2009
Posts
8,399
Reaction score
31
Location
Oklahoma
welcome to the site...it's a GREAT mod GM should have done from the factory. Relatively cheap, but if you have never installed one, have a tranny shop pop it in for you. Firms up the shift. (not only feels better, helps the tranny live longer!)
 

InTruckDesign

Full Access Member
Joined
Jun 5, 2009
Posts
832
Reaction score
26
Location
SW CT,
One of the best bang for the buck mods available.. A mod that you can feel the difference right away. As said above if you are not mechanically inclined or a bit leary on messing with your trans. then have a shop do it...if not there are some good write-up/how-to's out there. Biggest part is getting the snap ring seated firmly in its groove.
 

Conor

"Bob's your Uncle"
Joined
Apr 30, 2009
Posts
1,103
Reaction score
2
Location
Seattle, WA
Saw some posts about the adding a Vette servo to the the 4L60-E tranny. Looking for some feedback. Good mod? Any problems with it?

Stupid question, but what trucks have the 4L60-E tranny? Do all the new generation Tahoe's and Yuk's have them?
 

bocaytomas

Member
Joined
Jun 16, 2009
Posts
44
Reaction score
0
Seems like an interesting mod, does anyone have a tutorial or step by step?
 

blueflamed03

Supporting Member
Joined
May 4, 2009
Posts
8,399
Reaction score
31
Location
Oklahoma
Stupid question, but what trucks have the 4L60-E tranny? Do all the new generation Tahoe's and Yuk's have them?
I think 4L60e's started in the late 90's, most regular Tahoe, Yukon, Silverado's etc have 4L60e's...........the 60e was the 700r4 replacement.
 
OP
OP
T

tmeier

TYF Newbie
Joined
Sep 28, 2009
Posts
2
Reaction score
1
http://www.gmfullsize.com/forum/showthread.php?t=98029

Here is a good write up on installing the servo. Thanks for the responses. Conor before you tell me stupid question dont give me anything to make fun of you.
GM introduced the 4L60E tranny in 1982 and has been used on nearly every rear wheel drive application C/K Truck, Sonoma, Jimmy, Tahoe, Yukon, Astro, Safari, Suburban, Bravada, Firebird, Camaro,Corvette, etc... Not a new generation thing.
 

blueflamed03

Supporting Member
Joined
May 4, 2009
Posts
8,399
Reaction score
31
Location
Oklahoma
GM introduced the 4L60E tranny in 1982 and has been used on nearly every rear wheel drive application C/K Truck, Sonoma, Jimmy, Tahoe, Yukon, Astro, Safari, Suburban, Bravada, Firebird, Camaro,Corvette, etc... Not a new generation thing.
700r4's were used until 1992, 1990 the 700r4 was called 4L60, then 4L60e started in 1992.
 

Forum statistics

Threads
132,213
Posts
1,864,098
Members
96,744
Latest member
steveatwell

Latest posts

Top