VLEDS V3 TRITON WHITE

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Samsquanch

Member
Joined
Feb 27, 2012
Posts
40
Reaction score
13
Location
Manitoba, Canada
I was just about to buy a series of V3 tritons for my front DRL and signals since I have them in my tail lights... I looked up front and it didn't look like there was enough clearance to support V3's without them bumping into the radiator mount. How was the fit? Was it tight or did it go in without any modifications?
 
OP
OP
brockjhammer

brockjhammer

TYF Newbie
Joined
Aug 19, 2013
Posts
13
Reaction score
2
Location
Marietta,Ga
I was just about to buy a series of V3 tritons for my front DRL and signals since I have them in my tail lights... I looked up front and it didn't look like there was enough clearance to support V3's without them bumping into the radiator mount. How was the fit? Was it tight or did it go in without any modifications?


Drivers side was a breeze. The passenger side i had to remove the blue screw on piece on the LED housing, use the thinnest rubber washer and remove a bolt that holds on a bracket behind the headlight housing...you will see which one when you go to do the install. Nothing major and they look schweet.
 

NVDISZ71

TYF Newbie
Joined
May 25, 2016
Posts
1
Reaction score
0
Did you need the VLR resistors for these to work on your Hoe?
 

Forum statistics

Threads
133,343
Posts
1,884,015
Members
98,438
Latest member
Manekwa
Top