Vortec 6000 6.0 liter ticking at idle

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
D

Denali60

Member
Joined
Aug 27, 2014
Posts
30
Reaction score
0
Ok I ll try seafoam but someone is telling me to put 20w50 oil it will gueit it down since it has 150k miles I'm not sure if it's a good idea to run 20w50 what do u think
 

redemn93

Full Access Member
Joined
Oct 2, 2009
Posts
872
Reaction score
2
Location
Jupiter, Fl
you can also run rotella diesel oil for a few changes. see if that helps too. different/better properties than standard motor oil. the thicker oil is just a cover up and more for rod knock or piston pin slapping.
 
OP
OP
D

Denali60

Member
Joined
Aug 27, 2014
Posts
30
Reaction score
0
Thanks a lot for help I will try different oils and see which works best and I ll post in here which oil will work best on this high milage vortec6000
 

redemn93

Full Access Member
Joined
Oct 2, 2009
Posts
872
Reaction score
2
Location
Jupiter, Fl
do the seafoam in the crankcase, fuel tank and vacuum line a few times. run the rotella for a few oil change cycles. see what happens. it wont hurt anything and cheap enough to try.
 

01ssreda4

Full Access Member
Joined
Feb 28, 2014
Posts
1,124
Reaction score
487
They love seafoam because the exhaust smokes. Literally a smoke screen. My truck was well cared for, and very clean everywhere when I bought it. In overall better then average condition. It had a very minor oil pan leak, and I decided to replace the gasket. Here's what was inside: And remember, a cleaner like seafoam will dislodge all this crap and send it through your engine. Food for thought, and a before and after picture.

IMG_20140807_134725_752_zps11ab897b.jpg

IMG_20140807_154140_818_zpsd1eb2a33.jpg
 
OP
OP
D

Denali60

Member
Joined
Aug 27, 2014
Posts
30
Reaction score
0
Ur right I'm not going to take a chance with seafoam I ll try heavier oil first 20w50 and see what it does
 

Forum statistics

Threads
132,122
Posts
1,862,638
Members
96,613
Latest member
Lonestar67
Top