What did you do to your 2015-2020 K2XX Tahoe/Yukon Today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Bigkevschopshop

Full Access Member
Joined
May 5, 2019
Posts
814
Reaction score
2,042
Location
Northside H-Town
Nice! That's basically how I want my Denali to sit. Not slammed but just a mild drop. The Magneride is a pain, tho. What did you do to modify the rods that attach to the level sensor in the rear?
So when you pull the links, pull the plastic ends off, there is two grooves, I cut off between the two grooves so the second one now serves at the lock groove for the end plastic ball joint... I trimmed them and then ground down till they both were the same length in the caliper. I read somewhere here that .125 there is like 1" or something, hell I cant remember, so I took that figure I found and shortened them that much for 3" and has been fine.
 

jd08

Full Access Member
Joined
Dec 31, 2010
Posts
634
Reaction score
167
Location
Jackson, WI
Rotated the tires. While doing that I noticed a nail in one tire and passanger rear axle seal leaking. Hopefully the powertain warranty covers the seal.
 

Tonyv__

Full Access Member
Joined
Apr 18, 2018
Posts
3,351
Reaction score
7,461
Location
Bucks county PA
So when you pull the links, pull the plastic ends off, there is two grooves, I cut off between the two grooves so the second one now serves at the lock groove for the end plastic ball joint... I trimmed them and then ground down till they both were the same length in the caliper. I read somewhere here that .125 there is like 1" or something, hell I cant remember, so I took that figure I found and shortened them that much for 3" and has been fine.
So overall. You shortened the rod length like 0.375” ?
 

Fast_AT4

RWM +1
Supporting Member
Joined
Mar 26, 2022
Posts
1,040
Reaction score
1,504
Location
SW Florida
Accepted delivery to my house and within 30 minutes this happened. Need to do a proper wash, but this was good enough to get the trailer debris off her.
 

Attachments

  • 277756401_10224620317948293_5248080439207502612_n.jpg
    277756401_10224620317948293_5248080439207502612_n.jpg
    293.4 KB · Views: 12

gat0r

Full Access Member
Joined
Dec 11, 2015
Posts
3,107
Reaction score
5,831
Location
DFW
So when you pull the links, pull the plastic ends off, there is two grooves, I cut off between the two grooves so the second one now serves at the lock groove for the end plastic ball joint... I trimmed them and then ground down till they both were the same length in the caliper. I read somewhere here that .125 there is like 1" or something, hell I cant remember, so I took that figure I found and shortened them that much for 3" and has been fine.

i was told....
For every 1/8 adj. on the sensor rods changes the height 3/4".
 

Forum statistics

Threads
132,042
Posts
1,861,454
Members
96,492
Latest member
Chevy_Boy1990
Top