What did you do to your NBS GMT800 Tahoe/Yukon Today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Fosscore

Full Access Member
Joined
Apr 16, 2014
Posts
10,520
Reaction score
18,259
b4f300f81ae2445bc3000fef99718031.jpg added a little extra fill base to my Denali today. Got the early model OEM box and put this awesome speaker in it lol. Don't knock the speaker haha. I got it for $17 and it sounds great considering. I couldn't find the one I wanted in stock. I'll order it later and swap. I mounted the amp to the side of the box under the panel so everything is hidden.

Looks good. Why did you cut out the perforated OEM cover instead of just Dremeling out the perf bits? Looks good, just curious. On my list to do for that extra fill and keeping it stealth. @pnwdan
 

ScottyBoy

Full Access Member
Joined
Jun 27, 2010
Posts
2,608
Reaction score
1,817
Location
Shreveport, La
I'm in the same boat. I do use the third row in my Burban very often. I take a road trip to New Orleans every 3-4 months, and that's a 6 hour drive each way. I was considering building some custom subwoofer boxes to fit under the second row seats. I can definitely fit shallow mount woofers under there. I measured, its like 7-8 inches of space to work with. I'll still have to figure out where to mount the amps though.
 

ScottyBoy

Full Access Member
Joined
Jun 27, 2010
Posts
2,608
Reaction score
1,817
Location
Shreveport, La
Looks good. Why did you cut out the perforated OEM cover instead of just Dremeling out the perf bits? Looks good, just curious. On my list to do for that extra fill and keeping it stealth. @pnwdan

Or get the rear inside trim panel from a 00-02 Tahoe/Yukon in the junkyard. I see them all the time. If you got the sub box from an 02, should grab the trim panel too.
 

Rocket Man

Mark
Supporting Member
Joined
Dec 25, 2014
Posts
26,004
Reaction score
50,862
Location
Oregon
I've been debating this, just don't know if it will be enough for me. I'm used to far more, but with third row I don't have much space to spare since will still need that tiny bit of cargo room for road trip's. I know it won't hit quite like my previous setups I've had in other vehicles.

Like this..
20130410_182021.jpg

20130410_112747.jpg

2.5 cubes @ 38hz.

Sent from my SM-N920V using Tapatalk

I went with the MTX Thunderform enclosure in the stock location behind the left rear panel. It's spendy but makes use of all the available space so I can run a JBL 10" sub off a Soundstream Picasso Nano 450 watt monoblock amp mounted under the 2nd row seat. Completely stealth and it hits pretty good. The Soundstream also has a remote gain adjust so you can adjust bass instantly.IMG_4332.JPG IMG_4333.JPG
 

Fosscore

Full Access Member
Joined
Apr 16, 2014
Posts
10,520
Reaction score
18,259
@Red Rocket

Did your cover come that way or did you Dremel it out? Mine is all filled in and I've seen other guys cut it out. I actually did not pay attention to the trim ring as mentioned by ScottyBoy. Just seeing the differences in what other guys have done. Thanks.
 

ATIII

Full Access Member
Joined
Jan 21, 2015
Posts
420
Reaction score
414
Location
Brighton, CO (Denver)
The first test in that rare parts video where it shows the inner tie rod bending is a good example of what the sleeves would help protect against
That's my main problem with the stockers. You shouldn't have to put a cheesy ass sleeve on them so they CAN'T bend and brake. That point of failure shouldn't have even been an issue in the first place, requiring an aftermarket Band-aid for strength.


Sent from my iPhone using Tapatalk
 

Tonyrodz

Resident Resident
Joined
Feb 16, 2012
Posts
31,625
Reaction score
47,155
Location
Central Jersey
Or get the rear inside trim panel from a 00-02 Tahoe/Yukon in the junkyard. I see them all the time. If you got the sub box from an 02, should grab the trim panel too.
I grabbed the factory sub and box from that 02 my buddy parted out, and that rear grill wasn't perforated. From the looks of it didn't even look like anything was in it until I pulled the panel.WP_20160425_003.jpg WP_20160425_004.jpg
 

pnwdan

Cunning linguist
Joined
Aug 17, 2014
Posts
347
Reaction score
127
Location
Arlington, WA
Looks good. Why did you cut out the perforated OEM cover instead of just Dremeling out the perf bits? Looks good, just curious. On my list to do for that extra fill and keeping it stealth. @pnwdan
Honestly.... because I just spent a ton of time trimming this up with my Dremmel and had had enough of it. Lol 898d73b4f2815b2d2f33ef2565fcb9d5.jpg
 

Tonyrodz

Resident Resident
Joined
Feb 16, 2012
Posts
31,625
Reaction score
47,155
Location
Central Jersey
Maybe that's why then. Think it would or could work as a regular sub box? Guess I'd have to change the sub that's in it. Just hook it up as a regular sub box?
 

Forum statistics

Threads
132,379
Posts
1,867,055
Members
97,017
Latest member
97ext
Top