What did you do to your NBS GMT800 Tahoe/Yukon Today?

[Tonyrodz]

Added new driving lights. The halos are on when the truck is in drive (wired to the old DRLs), the driving lights come on with the headlights. While I was there, I had to drop the bumper valance to install the lights, so I cleaned it up, prepped it and painted it bumper/trim black. Also rewired the stock DRLs with new pigtails and they are now turn signals. Now I just need LED bulbs and new headlight and turn signal housings. Headlights aren't a year old and already hazing beyond being able to polish them out. I'll be having the next set of lenses clear coated.

You could wet sand buff then clear them.

 

[shakedown067]

They are really oxidized. I've gone down to 400 grit, and barely made a dent. I really want the black with diamond reflectors anyway. I'll roll them as is for now, but I'm done sanding and polishing these turds.

 

[Fosscore]

Just got home from the track, I'm still waiting for my buddy to send the videos. I was able to get 2 good runs in today

I was on map 6 with 93/e85 mix, 1st pass- 11.72 e.t. 118 mph (my personal best) 2nd pass- 11.82 e.t. 118 mph

After doing some calculations, looks like my 0-60 is a blistering 3.3 seconds... my fastest pass prior to today was 12.3 e.t. 115 mph, looks like the X pipe and updated tune worked. My 1st pass was against a 2002 Lamborghini(stock) who I beat by a bumper...my 2nd pass was against a 2011 Jeep Grand cherokee SRT (full bolt ons) who I walked by 5-6 cars from what I was told

Pissed I didn't break 10 seconds lol

View attachment 75536

View attachment 75537

Sweet!! Not an SAV, but s**t off a shovel. Bet you had some adrenalin flowing for the rest of the day.

 

[05Single]

They are hazed over. I've polished them numerous times. No water vapor inside. Yeah, they are plexi covers. Ive never liked the open look of the valance. No plans on factory fog lights. I like these little guys. I don't remember the brand of the lights. Cheapos from eBay. We started clear coating them at the shop I used to work at. They looked factory fresh a year later. I thought I could keep up with these, without clearing them. Nope.

If you get a chance check The back, should be a name stamped on the housing. Crazy only a year and they're that bad.

Arent you worried about the plexiglass getting dirty on the inside ?

Also we wanna see pics of the lights on please!

 

[shakedown067]

I keep the plexi rainxed. It actually stays pretty clean. I can also remove them quickly and clean them when needed. I'll snap some pics later this week. Truck has to be in gear for the halos to work.

 

[Cattivo]

Sweet!! Not an SAV, but s**t off a shovel. Bet you had some adrenalin flowing for the rest of the day.

I was hoping to break into the 10's but 11's will have to do for now... Plenty of adrenalin yesterday lol

 

[Cattivo]

About to pull the trigger on these but would like to know if the price seems right? I haven't made the seller an offer as of yet

GM Silverado Sierra Tahoe Heated LEATHER OEM Front Truck Seats 2000 2001 2002 ' | eBay

 

[MadDogDelpho]

Hey now the X5 is in no way a truck. That is by all definition a SUV, not dogging it cause I know it's the fastest production SUV on the planet, last time I checked. It's bad enough when people call tahoes and Yukons trucks. Maybe I'm just offended being only a pickup truck guy since I got my licensce lol
My Tahoe is my first SUV I've ever owned.

True, but like a lot of people (I believe) I hate saying "SUV" when talking about mine. It's so cumbersome with it's 3 syllables. When I say something like " I'm going to go wash my____" I always say truck. I hate saying "I'm going to go wash my SUV". It's just too long.

In my book, the chassis defines what the vehicle is. Since the Tahoe and Yukon are on the same frame as the Silverado and Sierra, I think they should all be called trucks. Up until 2003, they were identical from the B-pillar forward, and even after that you could still bolt up the noses between the two vehicles. I mean, hell, the suburban was around way before they were called SUVs. And after all of that, there are plenty of states which give SUVs truck plates.

 

[TheAutumnWind]

They are hazed over. I've polished them numerous times. No water vapor inside. Yeah, they are plexi covers. Ive never liked the open look of the valance. No plans on factory fog lights. I like these little guys. I don't remember the brand of the lights. Cheapos from eBay. We started clear coating them at the shop I used to work at. They looked factory fresh a year later. I thought I could keep up with these, without clearing them. Nope.

You need to seal them after you polish them otherwise they will haze back up quickly. The UV coating has failed (and then polished off entirely) and that is why they get hazy. There are wipe on products that will work, or you can spray them with a uv resistant clear coat.

 

[TheAutumnWind]

They are really oxidized. I've gone down to 400 grit, and barely made a dent. I really want the black with diamond reflectors anyway. I'll roll them as is for now, but I'm done sanding and polishing these turds.

Oh I see. Carry on then.