What did you do to your NBS GMT800 Tahoe/Yukon Today?

[seven9st surfer]

What's the process to do this? Does the headliner have to come down to get these antenna's out?

Yeah, it does. Remove the 4 screws from the sunvisors, 1 screw from the upper control pod assembly and pop it down, pop off the A-pillar plastic, remove rubber around the sunroof, and pop out the clips from the passenger side handle. Headliner should drop down enough to get a wrench in there. It was a 10mm for the Onstar on the drivers side, and a 22mm for the XM.

 

[Tonyrodz]

That's a weird way to spell weird lol. But it IS a weird word after all.

Eh... tomatoe, tomahtoe, it's all the same Red! Lol

 

[mmeachem]

Changed the oil. How does the magnet look? Normal?

Sent from my iPhone using Tapatalk

 

[Tonyrodz]

Changed the oil. How does the magnet look? Normal?

Sent from my iPhone using Tapatalk

I don't think it looks bad. How'd the debris look on the rag once you cleaned it off? Looks normal to me--from the pic.

 

[M3kanic]

Did the debris look on the rag? Brass or steel?

Sent from my SM-G955U using Tapatalk

 

[inmypassatlife]

Plugged up. I think the Duplicolor Clear yellowed on me a bit, but at least if I want to redo it, the plugs themselves were only like $4 total and sealed with silicone adhesive sealant.

View attachment 180561


The other side finished. This side came out a bit better:

View attachment 180563


The profile view:

View attachment 180560


Much better!

View attachment 180562


I still need to clean up the excess silicone once it cures, and maybe hit the area with the DA again.

Where did you get those plugs?

 

[TheAutumnWind]

It's like a time capsule.
Saw this today when I started it up. View attachment 180541
I'm pretty sure I've read the outside air bag sensors go bad. Anyone have any thoughts on the cause?

Hah. Im dealing with this tomorrow. Do you have a scan tool that can read advanced codes? Mine says passenger side front impact sensor is bad.

There are 4 sensors so guessing at them could get expensive at $65 a pop.

Replacing mine tomorrow. Should be simple...

 

[TheAutumnWind]

Where did you get those plugs?

Lowes. Go back a vouple pages he even linked pics with product numbers.

 

[inmypassatlife]

Lowes. Go back a vouple pages he even linked pics with product numbers.

I went all the way back to pg1939, didn't see nada

 

[seven9st surfer]

I went all the way back to pg1939, didn't see nada

http://www.tahoeyukonforum.com/thre...ahoe-yukon-today.12502/page-1952#post-1141206